drove fine wed night


i just put new sidefeeds in (use to have 440cc top feeds)

and now it smokes crazy

and oil leaks out of the exhuast!
plus #4 injector seems like it doesnt shoot?

damit, are my seals bad?
has like <2k on turbo!



when i remove plug no stuble

 

not good at all...

 

if you have oil coming out between your mani and head than i would say the problem is in your engine not your turbo

if you just replaced your injectors i would also suspect something going wrong with your engine. not a coincidence.

if you unplug your #4 injector and the motor runs the same i would say number 4 cyl has no compression.

did you do a retune for the new injectors? what size are the new ones you took the 440's out for?

 

440cc vs 480cc new
retuned

just saw it today

drove fine tuesday night no smoking nothing

 

You'll never know till you pull somethin apart. I'd pull all plugs and check compression and see if the plug is wet on #4. Chances are it's something in the motor, if all other cylinders are dry.

 

oil return works
oil drain is draining but very slow rate when car runs


185 190 185 175

Back to top

#4 little wet from gas, of course its not sparking
so it read alittl elower? cuz gas is just spraying

 

Since we know now your motor IMO is in decent shape, I would go ahead and pull the turbo and manifold off. I know it may be a pain, but then you can pinpoint where it's coming from exactly, either #4 cylinder or your turbo itself.

 

yah ill be doing that forsure

 

riped out the whole turbo today,

i dont think its valveseals
i belive it is the turbo
seems like there is little in/out play now


also fixed the 3cyl problem,
lower oring was pintched