oil out of turbine side and #4 runner flange
https://img.photobucket.com/albums/v.../myfx45043.jpg
https://img.photobucket.com/albums/v.../myfx45042.jpg https://img.photobucket.com/albums/v.../myfx45041.jpgdrove fine wed night i just put new sidefeeds in (use to have 440cc top feeds) and now it smokes crazy and oil leaks out of the exhuast! plus #4 injector seems like it doesnt shoot? damit, are my seals bad? has like <2k on turbo! when i remove plug no stuble |
Re: oil out of turbine side and #4 runner flange
You have obviously pushed oil past the seals. I think they are blown because it has been running fine at whatever oil pressure it's been seeing until now.
|
Re: oil out of turbine side and #4 runner flange
not good at all...
|
Re: oil out of turbine side and #4 runner flange
if you have oil coming out between your mani and head than i would say the problem is in your engine not your turbo
if you just replaced your injectors i would also suspect something going wrong with your engine. not a coincidence. if you unplug your #4 injector and the motor runs the same i would say number 4 cyl has no compression. did you do a retune for the new injectors? what size are the new ones you took the 440's out for? |
Re: oil out of turbine side and #4 runner flange
440cc vs 480cc new
retuned just saw it today drove fine tuesday night no smoking nothing |
Re: oil out of turbine side and #4 runner flange
You'll never know till you pull somethin apart. I'd pull all plugs and check compression and see if the plug is wet on #4. Chances are it's something in the motor, if all other cylinders are dry.
|
Re: oil out of turbine side and #4 runner flange
oil return works
oil drain is draining but very slow rate when car runs 185 190 185 175 Back to top #4 little wet from gas, of course its not sparking so it read alittl elower? cuz gas is just spraying |
Re: oil out of turbine side and #4 runner flange
Since we know now your motor IMO is in decent shape, I would go ahead and pull the turbo and manifold off. I know it may be a pain, but then you can pinpoint where it's coming from exactly, either #4 cylinder or your turbo itself.
|
Re: oil out of turbine side and #4 runner flange
yah ill be doing that forsure
|
Re: oil out of turbine side and #4 runner flange
riped out the whole turbo today,
i dont think its valveseals i belive it is the turbo seems like there is little in/out play now also fixed the 3cyl problem, lower oring was pintched |
All times are GMT -5. The time now is 09:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands