oil out of turbine side and #4 runner flange
#1
oil out of turbine side and #4 runner flange
drove fine wed night
i just put new sidefeeds in (use to have 440cc top feeds)
and now it smokes crazy
and oil leaks out of the exhuast!
plus #4 injector seems like it doesnt shoot?
damit, are my seals bad?
has like <2k on turbo!
when i remove plug no stuble
#4
Re: oil out of turbine side and #4 runner flange
if you have oil coming out between your mani and head than i would say the problem is in your engine not your turbo
if you just replaced your injectors i would also suspect something going wrong with your engine. not a coincidence.
if you unplug your #4 injector and the motor runs the same i would say number 4 cyl has no compression.
did you do a retune for the new injectors? what size are the new ones you took the 440's out for?
if you just replaced your injectors i would also suspect something going wrong with your engine. not a coincidence.
if you unplug your #4 injector and the motor runs the same i would say number 4 cyl has no compression.
did you do a retune for the new injectors? what size are the new ones you took the 440's out for?
#6
Re: oil out of turbine side and #4 runner flange
You'll never know till you pull somethin apart. I'd pull all plugs and check compression and see if the plug is wet on #4. Chances are it's something in the motor, if all other cylinders are dry.
#7
Re: oil out of turbine side and #4 runner flange
oil return works
oil drain is draining but very slow rate when car runs
185 190 185 175
Back to top
#4 little wet from gas, of course its not sparking
so it read alittl elower? cuz gas is just spraying
oil drain is draining but very slow rate when car runs
185 190 185 175
Back to top
#4 little wet from gas, of course its not sparking
so it read alittl elower? cuz gas is just spraying
#8
Re: oil out of turbine side and #4 runner flange
Since we know now your motor IMO is in decent shape, I would go ahead and pull the turbo and manifold off. I know it may be a pain, but then you can pinpoint where it's coming from exactly, either #4 cylinder or your turbo itself.
#10
Re: oil out of turbine side and #4 runner flange
riped out the whole turbo today,
i dont think its valveseals
i belive it is the turbo
seems like there is little in/out play now
also fixed the 3cyl problem,
lower oring was pintched
i dont think its valveseals
i belive it is the turbo
seems like there is little in/out play now
also fixed the 3cyl problem,
lower oring was pintched
Thread
Thread Starter
Forum
Replies
Last Post
weemanch
Turbo Parts For Sale
6
08-01-2008 01:14 AM