not hitting full boost
#11
Re: not hitting full boost
Originally Posted by flipkronikz
so with a mbc i can up the boost passed the wastegate spring psi of 10psi i always thought the mbc could only go as high as the spring setup on the wastegate.
IE; a wg outfitted with a 5psi spring cannot be lowered any more than 5psi, but can be raised to any level that the turbo can output.
Also, if you are running an external gate, you should hook up the boost controller between the vac/boost signal and the top port of the wastegae.
#12
Guest
Posts: n/a
Re: not hitting full boost
Originally Posted by reactone
You got it backwards, with an MBC you can't go any lower than the spring value.
IE; a wg outfitted with a 5psi spring cannot be lowered any more than 5psi, but can be raised to any level that the turbo can output.
Also, if you are running an external gate, you should hook up the boost controller between the vac/boost signal and the top port of the wastegae.
IE; a wg outfitted with a 5psi spring cannot be lowered any more than 5psi, but can be raised to any level that the turbo can output.
Also, if you are running an external gate, you should hook up the boost controller between the vac/boost signal and the top port of the wastegae.
#13
Re: not hitting full boost
so basically scratch the dual spring idea and get the mbc for the 2 psi?? i might as well bump it up to 12psi and call it a day. anybody have any suggestions for where my adjustable cam gear should be set up at im currently at 2 degreees advanced and havent really noticed any big gains. im thinkin about retarding it 2 degrees for better top end. let me know guys.
#14
Re: not hitting full boost
Originally Posted by ghettoturbo
yes and no...sometimes its tough getting a wg with a low opening psi to work at high boost levels
Thread
Thread Starter
Forum
Replies
Last Post
Turbofox88
Forced Induction
8
12-08-2012 07:15 PM