Noobish question. D16A6.
#32
Re: Noobish question. D16A6.
272 grind is meant for all motor madness really. If you want a grind go with the 257 or 260 grind they offer
Also port work will help on boost alot more than a cam will. Also a mucho throttle body like a 70mm will give ya increased top end without killing the bottom end like a large cam will with no compression.
Also port work will help on boost alot more than a cam will. Also a mucho throttle body like a 70mm will give ya increased top end without killing the bottom end like a large cam will with no compression.
#33
Re: Noobish question. D16A6.
Originally Posted by chris
272 grind is meant for all motor madness really. If you want a grind go with the 257 or 260 grind they offer
Also port work will help on boost alot more than a cam will. Also a mucho throttle body like a 70mm will give ya increased top end without killing the bottom end like a large cam will with no compression.
Also port work will help on boost alot more than a cam will. Also a mucho throttle body like a 70mm will give ya increased top end without killing the bottom end like a large cam will with no compression.
Port work is definitely in the plans.
Any tips for a basic port on the A6 head Chris? I would assume that the basic bowl port and short side radius would do the trick.
#35
Re: Noobish question. D16A6.
Originally Posted by chris
hog the ---- out of it
get rid of 55mm piece of ---- throttle body. BUy a 70mm tb from your favorite mod
get rid of 55mm piece of ---- throttle body. BUy a 70mm tb from your favorite mod
Haven't you had one for sale for a while now?
Chris, I assume that I would either have to go with a Skank2 manifold or cut the A6 up and make it work with a large TB. I have seen pictures of an A6 manifold that had the plenum vilume enlarged and an new TB mounting surface added floating around.
#36
Re: Noobish question. D16A6.
Originally Posted by snm95ls
Haven't you had one for sale for a while now?
Chris, I assume that I would either have to go with a Skank2 manifold or cut the A6 up and make it work with a large TB. I have seen pictures of an A6 manifold that had the plenum vilume enlarged and an new TB mounting surface added floating around.
I have sold like 10 of them in the last 2months on here
Um a z6 manifold will hold a 70mm tb you just have to weld up the iacv port
or go with any aftermarket unit. Or even better go box plenum
#37
Re: Noobish question. D16A6.
Originally Posted by chris
I have sold like 10 of them in the last 2months on here
Um a z6 manifold will hold a 70mm tb you just have to weld up the iacv port
or go with any aftermarket unit. Or even better go box plenum
Do you literally mean hog the ---- out of the head? It is an A6 head after all and I will be using a spare head to do all this with.
Thread
Thread Starter
Forum
Replies
Last Post