New!first post!
09-02-2004, 07:48 PM
#11
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:New!first post!
I think what people are trying to say is, research like everyone else did. there is no 1 thread on this site that are "instructions" on how to construct a turbo kit.
you pretty much named everything that you needed, except for fuel management, and oil lines.
now for your intercooler piping, you can use anything that will hold pressure. ive seen peoeple us pcv piping, "universal" coolant hoses conntected together, flex piping, but most use mandrel bent 2.5" piping. (exhaust tubeing) you can use whatever your little heart desires.
you pretty much named everything that you needed, except for fuel management, and oil lines.
now for your intercooler piping, you can use anything that will hold pressure. ive seen peoeple us pcv piping, "universal" coolant hoses conntected together, flex piping, but most use mandrel bent 2.5" piping. (exhaust tubeing) you can use whatever your little heart desires.
09-02-2004, 07:50 PM
#12
3.0 BAR
Join Date: Apr 2003
Posts: 2,612
Re:New!first post!
the thing is that you're asking every question at once.
"------ your hustle" one thing at a time. on a d16 10psi well tuned expect to see no more than 210hp. and you're missing the oil lines i think on your list. if you're gonna do this yourself, you're gonna need some welding for the charge pipes and the down pipe. not to mention a manifold. you're welcome on the site, but i don't think anyone here's gonna take up an hour to post step by step instructions. did you laugh at the Nicole Kidman joke?lol
"------ your hustle" one thing at a time. on a d16 10psi well tuned expect to see no more than 210hp. and you're missing the oil lines i think on your list. if you're gonna do this yourself, you're gonna need some welding for the charge pipes and the down pipe. not to mention a manifold. you're welcome on the site, but i don't think anyone here's gonna take up an hour to post step by step instructions. did you laugh at the Nicole Kidman joke?lol
09-02-2004, 08:16 PM
#13
1.0 BAR
Thread Starter
Join Date: Sep 2004
Posts: 308
Re:New!first post!
ok, thank you.that was helpfull.as for the piping, is there a certain kind of metal that works better than others?or a certain thickness?i dont want pvc piping i know that.
and yes, i laughed HARDELY, HAR D HAR HAR :P
and yes, i laughed HARDELY, HAR D HAR HAR :P
09-02-2004, 10:18 PM
#14
3.0 BAR
Join Date: Apr 2003
Posts: 2,612
Re:New!first post!
most of the people here including myself get the piping from jcwhitney 2 1/4" aluminized mandrel bent is good. just measure more or less by eye the amount of tubing aswell as the type of degree tubing you need. 45degree 90degee etc. after you gigure out where you're gonna mount your intercooler. for the oil lines, cheapest and strongest would be 1/8" npbt brake oil line(as in the brakes, inbetween the clutch and accelerator), it's gonns be a straight thin steel tube with threaded fittings that rotate at the end of the tubing, figure out what length you need and you can find it at any auto parts. you can bend this tubing by hand from the oil sending unit which you'll T off of to your turbo.
09-03-2004, 10:32 AM
#15
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:New!first post!
Originally Posted by trebor_nordap
most of the people here including myself get the piping from jcwhitney 2 1/4" aluminized mandrel bent is good. just measure more or less by eye the amount of tubing aswell as the type of degree tubing you need. 45degree 90degee etc. after you gigure out where you're gonna mount your intercooler. for the oil lines, cheapest and strongest would be 1/8" npbt brake oil line(as in the brakes, inbetween the clutch and accelerator), it's gonns be a straight thin steel tube with threaded fittings that rotate at the end of the tubing, figure out what length you need and you can find it at any auto parts. you can bend this tubing by hand from the oil sending unit which you'll T off of to your turbo.
09-03-2004, 10:45 AM
#17
0.0 BAR
Join Date: Apr 2004
Posts: 0
Re:New!first post!
Originally Posted by trebor_nordap
are you serious sceeg? if he can't type the name on his browser then he's beyong help. no offense 93hatchy. talk about nit picking. geeeeeez
09-03-2004, 10:50 AM
#18
3.0 BAR
Join Date: Apr 2003
Posts: 2,612
Re:New!first post!
he you go 93hatchy! hey we want pics when you do your install! aluminized tubing link: http://www.jcwhitney.com/autoparts/P...atalogId-10101
Thread
Thread Starter
Forum
Replies
Last Post
nyc86zc
General Discussion
37
08-07-2004 03:56 PM
