NEED HELP!!! strange probelems after head install

Reply Subscribe

Thread Tools

Search this Thread

Mar 16, 2006 | 03:14 PM

#11

d16y8crx

0.5 BAR

Joined: Nov 2004

Posts: 86

Re: NEED HELP!!! strange probelems after head install

I had a problem like that to, where you give it gas and it idles down and starts to die, it turned out it was the map sensor, double check that, even if it was good before, mine went out for no reason.

Mar 16, 2006 | 03:50 PM

#12

staticchmbr

Thread Starter

1.0 BAR

Joined: Mar 2004

Posts: 609

Re: NEED HELP!!! strange probelems after head install

well try another one. hopefully thats the problem. there was no check engine light though.... i was also thinking the tps, but again..no CEL

Mar 16, 2006 | 03:59 PM

#13

Bone1

0.0 BAR

Joined: Jan 2005

Posts: 0

Re: NEED HELP!!! strange probelems after head install

cam timing is off..........1/2 tooth error (4.75 degrees) due to the 5mm shorted D15 block deck height.

Use a Y7/Y8 cam gear and set the ignition timing to 18-19 BTDC.

Mar 16, 2006 | 10:45 PM

#14

primercrx

0.5 BAR

Joined: Feb 2006

Posts: 84

Re: NEED HELP!!! strange probelems after head install

wild guess, vacume leak

Mar 17, 2006 | 04:56 AM

#15

Random Hero

3.0 BAR

Joined: Nov 2004

Posts: 2,312

Re: NEED HELP!!! strange probelems after head install

Quote:

Originally Posted by Mista Bone

cam timing is off..........1/2 tooth error (4.75 degrees) due to the 5mm shorted D15 block deck height.

Use a Y7/Y8 cam gear and set the ignition timing to 18-19 BTDC.

bone is right.