HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   my soon to be turbo set up? (https://www.homemadeturbo.com/forced-induction-7/my-soon-turbo-set-up-28539/)

Reddy 10-22-2004 03:55 PM
Re:my soon to be turbo set up?
 
Originally Posted by southpole12
running the hack is ghetto as a motha unless you want to blow up your motor. Get it tuned and that t25 will work fine for you, it spools up quicker than the t25.

The hack has been proven time and time again as decent fuel management, it just has its limitations.




Also, if you can get a bigger turbo, always go for the biger turbo

PaintItBlack 10-22-2004 09:12 PM
Re:my soon to be turbo set up?
 
Originally Posted by Xplocivic
southpole, do you have a turbo car? I have run the hack for almost 6 months and haven't had one problem. Stock D16Z6 making about 210 hp at 10 psi. I am getting my spare P28 chipped for Uberdata but I wouldn't put the hack down so badly.
Thats because you are using the hack correctly pushing it to the stock map sensor's limits thus allowing for the most desirable ignition timing. knock your dizzy back 4-6* and its relatively safe. I bet your mpgs are pretty iffy though.

ubercivic 10-26-2004 04:38 PM
Re:my soon to be turbo set up?
 
ttt

ubercivic 10-29-2004 11:52 PM
Re:my soon to be turbo set up?
 
ttt


All times are GMT -5. The time now is 10:49 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands