my soon to be turbo set up?
 

hi my turbo setup is going to be simple.

-gt20
-hf mani
-uberdata
-450cc blue tops
-intercooler off a chrysler conquest
-oil feed/return line kit

you guys think this set up is ok? i would love for some feedback and some ideas one what i could change or be better than what im goig with?

Re:my soon to be turbo set up?
 

I'd say go with the hack and DSM 450cc injectors and your set up will be better off. Don't forget guages and oil feed/drain.

Re:my soon to be turbo set up?
 

Setup looks ok........with the fmu I'd run 5-6 lbs and with a vafc i'd run 10-11 lbs of boost.

Re:my soon to be turbo set up?
 

do you already have the t25? it's gonna run outta boost at 6k rpms, they're too small getta t3.

Re:my soon to be turbo set up?
 

well im still looking for a turbo i thought that the t25 would be good for a small motor but if i could get a t3 around the same price as the t25 then ill go with that??? but thanks so far for all the input

Re:my soon to be turbo set up?
 

If you were planning on getting the T25 out of a car at the junkyard just look for a car that would have a T3 (Chrysler's?). If not I'm sure there is an abundance of them on ebay...but thats always hit or miss because you can't check the shaft play before you buy.

Good luck

Re:my soon to be turbo set up?
 

which chryslers came with t3's chrysler conguest or the station???? or no?

Re:my soon to be turbo set up?
 

Any of the old 80's 2.2 Turbo dodges used some form of a T3. But just note they have a goofy flange, not a standerd T3.

Re:my soon to be turbo set up?
 

running the hack is ghetto as a motha unless you want to blow up your motor. Get it tuned and that t25 will work fine for you, it spools up quicker than the t25.

Re:my soon to be turbo set up?
 

southpole, do you have a turbo car? I have run the hack for almost 6 months and haven't had one problem. Stock D16Z6 making about 210 hp at 10 psi. I am getting my spare P28 chipped for Uberdata but I wouldn't put the hack down so badly.