Re: MY F22's new turbo to be. 56k go find a rope.
Originally Posted by SinisterCRX
So you're using F22 forged pistons with H23 rods? We're looking to build up another block for my cousins F22 and I'm very interested in this... H23 rods work without modification?
|
Re: MY F22's new turbo to be. 56k go find a rope.
for the most part, I'm pretty positive that H23 rods and F22's rods are the same. Also, H23 rods will swap right into the old B20A5 motor that came in the late 80's prelude's
|
Re: MY F22's new turbo to be. 56k go find a rope.
Originally Posted by hebijake
sweet deal Ron-Jon, that turbo's gonna work pretty well. It is a bit larger granted, but you have to remember that spool up time is only an issue on the street from a dead stop. At the track your gonna be poundin it off the lights and even on the street once you get through 1st gear, you'll be in your R's the rest of the way. ;) to you bro! your well on your way to boostin happy
|
Re: MY F22's new turbo to be. 56k go find a rope.
Originally Posted by SinisterCRX
So you're using F22 forged pistons with H23 rods? We're looking to build up another block for my cousins F22 and I'm very interested in this... H23 rods work without modification?
|
Re: MY F22's new turbo to be. 56k go find a rope.
i thought the npr's were 3.9l 4 bangers
|
Re: MY F22's new turbo to be. 56k go find a rope.
Originally Posted by Boosted4Life
i contacted wiseco about pistons they quoted me like 350 for custom forged 8.7to1 pistons no pics yet but i will post up during the build
Originally Posted by jdmcord
IMO, thats not very built. I was thinking more like you resleeved it. I mean, that is a big turbo to get to spool befiore 4k, so you either need get some highercr pistons and get a little more than a rebuilt head wtih vavle job done, or get a smaller tubo.
I mean ---- dude, if that thing came off a 5.x liter turbo and was in boost by 2.6k rpm, imagine at what rpm that bitch is gona spool at in your car. You didnt even bore it out some. -Jose forged rods, pistson, and upgraded valvetrain.. what more needs to be done to be "fully built" h23 and f22 have the same exact rods. both have a 5.572 length, .935 width, 2.008 be bore, .8649-.8654 pin bore. as far as i know, eagle doesnt make anything for the f22 or h23. the only major company that makes rods for the h23/f22 are crower and they cost damn near 700. importbuilders and probe make rods for the f22/h23 and i have heard good things about them. i heard from a guy that used to work at importbuilders that the importbuilder rods are basically probe rods but the rod bolts used in the IB rods are slightly better than probes bolts. raceeng.com has some off the shelf f22 forged pistons w/ stock 8.8:1 CR made by Wiseco. when i have the money this will be my setup.. raceng/wiseco forged pistons, probe/IB rods, stock sleeves, and stock head w/ jdm f22b dohc or h23 intake manifold and bored throttle body spooling a t3/to4e 57trim .60/.63ar. |
Re: MY F22's new turbo to be. 56k go find a rope.
Originally Posted by prelude9384
Yes sir, h23 and f22a1 rods are the same length. I got a sweet deal on some h23 rods from tuner toys.
im sure they are just $250 generic/no name china forged 4340 steel h beam rods. i have thought about picking up a set of these but too scared i will regret cheapin out. |
Re: MY F22's new turbo to be. 56k go find a rope.
Originally Posted by bonestock94
post up some reviews on how well they hold up....
im sure they are just $250 generic/no name china forged 4340 steel h beam rods. i have thought about picking up a set of these but too scared i will regret cheapin out. |
Re: MY F22's new turbo to be. 56k go find a rope.
thats the way i feel also i can get a new f22 for like 200 bucks but if u blow up a h22 u r lookin at between 1500-2000 bucks so that would just make me cry to blow up a h22
|
Re: MY F22's new turbo to be. 56k go find a rope.
srry, I had forgotten that you could use forged rods/pistons without resleeving. I am so used to talkin about H22's and ----.
but yea, thats true that you can get over 400hp from the stock sleeves, just some good pistons and rods. You guys should do an f22/h23 head swap, have a better platform to start on. ya know? -Jose |
All times are GMT -5. The time now is 03:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands