Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi on a Mustang, D16 FTMFW!
 

My act street clutch lasted longer than a my b16 tranny, after that I went with an LS tranny and boost and it holds fine for about a year now. Still works like new and never slips.

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi on a Mustang, VIDEO UP
 

holy ----...
Attachment 13498

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

------- awesome, front page vote

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

knock knock knocking on...........WTF???????????

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

ouch

thought you had it tuned?

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

:o so much for those vitaras huh

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

me too :-\

there was a little bit of oil in the intake from the turbo seals going out, so i don't know if maybe that caused it or not. it took 500 miles of abuse boosted, and the seals just started going out about 100 miles ago. i would assume if there was that much detonation that it wouldn't have lasted this long.

i dont think the block guard helped matters any either
Attachment 13475

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

Rods/crank still good? Guess this is what makes vitara builds nice 100 bucks for another set of pistons

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

the crank is questionable but the rods look good still other than a little molten metal flakes on the one rod, but that scraped right off. i still need a new block though because it actually left a pit in the cylinder wall that i highly doubt will come out by boring it another .5mm over.

Re: my d16z6 holset vitara build, 306hp 267tq at 19 psi ,NOW WITH CARNAGE
 

Which piston is it?
The ---- up 3 and 4, and cause over heating problems. Supposedly
http://img67.imageshack.us/img67/8782/dscf9561uv8.jpg
http://img112.imageshack.us/img112/3540/dscf9564eb3.jpg
This is why I bought a GE one instead.
Ill find out if there any good soon. >:D