Modding the center housing

Reply Subscribe

Thread Tools

Search this Thread

May 18, 2008 | 01:58 AM

effvee

Thread Starter

0.0 BAR

Joined: Mar 2008

Posts: 18

Modding the center housing

Will ceramic bearings be evern better?

May 18, 2008 | 02:01 AM

con

0.0 BAR

Joined: Nov 2003

Posts: 0

Re: Modding the center housing

I drilled mine out and used two rc car ball bearings. The hobby shop had a set that was a perfect fit on my shaft. Spools about 450 rpm sooner then before

May 18, 2008 | 02:21 AM

Smith-02

0.0 BAR

Joined: Apr 2006

Posts: 0

Re: Modding the center housing

Quote:

Originally Posted by highroller54

I drilled mine out and used two rc car ball bearings. The hobby shop had a set that was a perfect fit on my shaft. Spools about 450 rpm sooner then before

make sure they're teflon sealed. 5x11 bearings fit, but you can use 6x11

May 18, 2008 | 02:59 AM

toyollAZ86

1.0 BAR

Joined: Jan 2007

Posts: 338

Re: Modding the center housing

thats sick. practically free upgrade

May 18, 2008 | 03:59 AM

2GeclipseRST

1.0 BAR

Joined: Apr 2008

Posts: 429

Re: Modding the center housing

I wont have any lag as it is with a dsm t25. I may give this a try before i'm ready to send the turbo off to be refitted for a t28 chra.......

Sleeper status.

May 20, 2008 | 04:36 PM

effvee

Thread Starter

0.0 BAR

Joined: Mar 2008

Posts: 18

Re: Modding the center housing

Quote:

Originally Posted by highroller54

I drilled mine out and used two rc car ball bearings. The hobby shop had a set that was a perfect fit on my shaft. Spools about 450 rpm sooner then before

Hi, you think ceramics would make a difference? Spooling from 2500 to 2000, man that seem like something to aim for