manifold and turbo positioning
10-07-2004, 10:22 PM
#1
1.5 BAR
Thread Starter
Join Date: Sep 2003
Posts: 708
manifold and turbo positioning
for a t3/t4, external wastegate, b18a in a 90 integra.
what I want is for the turbo to have the exhaust housing on the passenger side, so that the downpipe doesn't have to curve around my oil return line.
I want it as simple and straight as possible.
no access to a welder, so what manifold should I look at to get this how I want?
what I want is for the turbo to have the exhaust housing on the passenger side, so that the downpipe doesn't have to curve around my oil return line.
I want it as simple and straight as possible.
no access to a welder, so what manifold should I look at to get this how I want?
10-09-2004, 08:28 AM
#4
3.0 BAR
Join Date: Jul 2004
Posts: 3,207
Re:manifold and turbo positioning
buy one of these
https://www.homemadeturbo.com/forum/...threadid=25780
and get the "short tubuler" one... has a pic of exactly how u want it...
https://www.homemadeturbo.com/forum/...threadid=25780
and get the "short tubuler" one... has a pic of exactly how u want it...
Thread
Thread Starter
Forum
Replies
Last Post
