white95eg

I'm going down to the local junkyard on Sat. to see what I can find, but I'd like to know which turbos I should be looking for. I've heard that the Ford TB0344 would be a good choice. For now I'll be running a max of 10 psi. I was looking at the junkyard turbo list, and noticed that the Mercury turbo is the same, and the SAAB 9000 turbo might be good also (just a bit bigger). What do you think? Is there any others I should keep an eye out for?

mahcivic

im using a saab 900 turbo...and it works perfect. sounds sweetness too.

hotrex

b series id go at least a t3 60/63

sunny jay

I have a t3 from a ford turbo coupe (manual). .60/.63, has very lil shaft play. Let me know if u want it.

white95eg

how much do you want for it? Could I rebuilt it if i needed to?

preacherboy

hey man, i got a garrett t3 thats getting a rebuild right now, if your intrested, i was going to use it on my b18c but im getting a built ls !! so ill go bigger now, PM me if your intrested or emial me
belikejchrist2@aol.com

sunny jay

you got pm'd

leed

Deff. a 60/63 for a JY turbo. I made 237 at 8psi (.48 ar) and 262 (.63 ar) at 11psi. So you should be in that range. At those levels though, that turbo is working pretty hard, and it shows on my dyno graphs, the high cam is not making the torque it should be. I have seen a dyno graph of a B16 making just a hair over 300whp on that turbo at an unknown psi. Prolly a ---- ton.

white95eg

Sounds good, thanks for the replies. So a T3 60/63 is what i'll be looking for at the junkyard.

Sunny and Preacher, if I don't find anything I'll get in touch with both of you.