internal wastegate springs?
#1
internal wastegate springs?
is there anywhere to buy a universal wastegate spring that you can install in a factor internal wastegate to set it at a certain baseline boost setting?
there was a leak in my previous turbo setup so i never had enough pressure to open the wastegate ive got now. and when i got it the seller said it was stock set at 10psi but im not sure i trust his word.
so i wanna get like a 5psi spring and go from there.
there was a leak in my previous turbo setup so i never had enough pressure to open the wastegate ive got now. and when i got it the seller said it was stock set at 10psi but im not sure i trust his word.
so i wanna get like a 5psi spring and go from there.
#3
Re: internal wastegate springs?
I had the same question, and found these -
http://www.hksusa.com/products/?id=810&rsku=0
How does one go about cracking open the actuator to install one of these?
Its for my Pulsar T28 with a 10.5 psi spring.
http://www.hksusa.com/products/?id=810&rsku=0
How does one go about cracking open the actuator to install one of these?
Its for my Pulsar T28 with a 10.5 psi spring.
#5
Re: internal wastegate springs?
Originally Posted by ****
I've also seen someone crack open the vacuum canister on these and cut a coil off the spring thats already in it. not the best way to go if you ask me, but I guess it got the job done.
Thread
Thread Starter
Forum
Replies
Last Post
ryan1
Wanted
9
08-21-2007 11:11 AM
djay86
Forced Induction
10
11-26-2005 03:56 PM