installed turbo: idles, no CEL, give it gas and it stalls?
#1
installed turbo: idles, no CEL, give it gas and it stalls?
I just helped a friend install a turbo kit on his B16 (hes got a 91 Civic running an OBD1 ECU).
The car starts up
It idles fine
There are no Cech engine lights
As soon as he gives it gas it stalls.
Any suggestions on what to check? Thanks
1991 Civic
1993 B16 out of a Del Sol
OBD0-OBD1 conversion harness
Chipped P28 ECU
Running the latest Crome version
Greddy turbo
Profec B Boost controller
The car starts up
It idles fine
There are no Cech engine lights
As soon as he gives it gas it stalls.
Any suggestions on what to check? Thanks
1991 Civic
1993 B16 out of a Del Sol
OBD0-OBD1 conversion harness
Chipped P28 ECU
Running the latest Crome version
Greddy turbo
Profec B Boost controller
#8
Re: installed turbo: idles, no CEL, give it gas and it stalls?
buddys car did it with 450's ... started it up idle.. rev it past three grand it would literally flood the car and die... boost leak fixed doesnt do it anymore... just try'n to help the kid out smallblock ... i would double check vacuum lines they all may be hooked up .. just not in the right places @!
#9
Re: installed turbo: idles, no CEL, give it gas and it stalls?
crome is picky.
id bet its the way you built the basemap. the other night i did one for a guy, uploaded it to the ostrich and got similar results. rebuilt the basemap in a different order of doing things and uploaded it, car fired right up and ran beautifully.
id bet its the way you built the basemap. the other night i did one for a guy, uploaded it to the ostrich and got similar results. rebuilt the basemap in a different order of doing things and uploaded it, car fired right up and ran beautifully.
Thread
Thread Starter
Forum
Replies
Last Post
XpL0d3r
Forced Induction
2
10-26-2010 07:48 AM
Turblow
Hybrid/Tech
18
11-24-2006 05:10 AM
chiman72
Engine Management
10
05-09-2006 07:57 AM
robs99si
Forced Induction
6
06-24-2004 11:03 AM