rsmith2786

Ok i picked out a turbo off ebay which comes with the manifold an downpipe. Here are the specs:
3" INLET DIAMETER
2" OUTLET
WET FLOATING BALL BEARINGS
1/8 NPT OIL INLET
T3 / T4 FOOTPRINT OK !!
.57 COMPRESSOR WHEEL TRIM
.60 A/R COMPRESSOR
.63 A/R TURBINE
Will this one work.
Then what will be a safe PSI to run on a stock D16Y8 is 6 good and then where can i find an external wastegate(35mm)for this i looked on ebay but all i could find were 8PSi which i thought was too high. My engine has 118,000 miles on it. Also i have a buget of about $200 for fuel management what would you guys suggest. Im just trying to get all of this stuff figured out and ill be buying in about 2 weeks . Also what intercooler fits good on a 6th gen coupe for a decent price. Thanks alot!

ZexRex

best cheap intercooler: http://www.speedpartsrus.com/

6 to 8 psi is fine if you get 450 cc injectors and a afc
that will be about $300

a fmu, msd btm and stock injectors will work but is not as safe, it might blow your motor at only 6 psi on that t3/t4. they are about $200

ghetto dyne is cheapest at $200, get your ecu socketed and buy a chip in the classifieds.

if you have an external wastegate you can buy different springs for it for any psi.

88crxSi

ghettodyne wont work for you its for obd0 only as far as i know.

ZexRex

oh ya thats right, its obd0 only, just go with the afc/injectors

OnYx

BTW being new we HATE people that cant post in the right forum.

d16forlife

Hey click on custom coaches Ebay store.Thats some funny ----!Hese selling PVC bondage suits and kinky lingere.Not dissing I just think its funny to sell intercoolers and kinky lingenere
...........mmmmmmmm kinky boosted car driving chicks.Thanks fort the visual custom coac

fastcivicboy

if you need a resistor box for the 450's just hit me up! Ill sell you one for real cheap!

rsmith2786

Sorry i wanted to look through the forum before i sasked my question to make sure my aswer wasnt already waiting for me. I thought i was in the general forum.