I'm new and need lots of help!
Ok i picked out a turbo off ebay which comes with the manifold an downpipe. Here are the specs:
3" INLET DIAMETER 2" OUTLET WET FLOATING BALL BEARINGS 1/8 NPT OIL INLET T3 / T4 FOOTPRINT OK !! .57 COMPRESSOR WHEEL TRIM .60 A/R COMPRESSOR .63 A/R TURBINE Will this one work. Then what will be a safe PSI to run on a stock D16Y8 is 6 good and then where can i find an external wastegate(35mm)for this i looked on ebay but all i could find were 8PSi which i thought was too high. My engine has 118,000 miles on it. Also i have a buget of about $200 for fuel management what would you guys suggest. Im just trying to get all of this stuff figured out and ill be buying in about 2 weeks :). Also what intercooler fits good on a 6th gen coupe for a decent price. Thanks alot! |
Re:I'm new and need lots of help!
best cheap intercooler: http://www.speedpartsrus.com/
6 to 8 psi is fine if you get 450 cc injectors and a afc that will be about $300 a fmu, msd btm and stock injectors will work but is not as safe, it might blow your motor at only 6 psi on that t3/t4. they are about $200 ghetto dyne is cheapest at $200, get your ecu socketed and buy a chip in the classifieds. if you have an external wastegate you can buy different springs for it for any psi. |
Re:I'm new and need lots of help!
ghettodyne wont work for you its for obd0 only as far as i know.
|
Re:I'm new and need lots of help!
oh ya thats right, its obd0 only, just go with the afc/injectors
|
Re:I'm new and need lots of help!
BTW being new we HATE people that cant post in the right forum.
|
Re:I'm new and need lots of help!
Hey click on custom coaches Ebay store.Thats some funny ----!Hese selling PVC bondage suits and kinky lingere.Not dissing I just think its funny to sell intercoolers and kinky lingenere
...........mmmmmmmm kinky boosted car driving chicks.Thanks fort the visual custom coac ;D ;D |
Re:I'm new and need lots of help!
if you need a resistor box for the 450's just hit me up! Ill sell you one for real cheap!
|
Re:I'm new and need lots of help!
Sorry i wanted to look through the forum before i sasked my question to make sure my aswer wasnt already waiting for me. I thought i was in the general forum.
|
All times are GMT -5. The time now is 10:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands