have just gotten to starting up my b16a turbo civic hatch and i have driven the car around before without the turbo and had itbs on it and it ran and idled fine. now i have installed the turbo and have gotten the chipped ecu from zenocron runnin with a t3/t40E .63/.50 60 trim and go to start it up it starts up and runs but it wont idle if i hold on the gas a little it idles fine but as soon as i let the throttle close it boggs out and dies and the ecu is throwing code 14 for IACV but i have it hooked up on the firewall like its supposed to as far as i understand it is also the only code that i am having so any advise to what i can do would be very helpful i am runnin a pr4 ecu and turbo edit is there a way i can shut off the iacv through turbo edit? or is there a way i can trick it by sending it a voltage? thanks

 

everytime i had a iacv code the iacv had nothing wrong with it
it was the ecus fault

but thats just me

 

well do i get a new chipped ecu or is there a different way to solve this problem?

 

try a good known ecu
if its easier to try a new iacv first then do that

 

mine have crome and the IACV disable script from xenocron, it works perfectly

 

x2

 

Have you tried swapping on another IACV? Also, keep in mind you will still need to flow coolant through the valve for it to work correctly.