IACV
 

have just gotten to starting up my b16a turbo civic hatch and i have driven the car around before without the turbo and had itbs on it and it ran and idled fine. now i have installed the turbo and have gotten the chipped ecu from zenocron runnin with a t3/t40E .63/.50 60 trim and go to start it up it starts up and runs but it wont idle if i hold on the gas a little it idles fine but as soon as i let the throttle close it boggs out and dies and the ecu is throwing code 14 for IACV but i have it hooked up on the firewall like its supposed to as far as i understand it is also the only code that i am having so any advise to what i can do would be very helpful i am runnin a pr4 ecu and turbo edit is there a way i can shut off the iacv through turbo edit? or is there a way i can trick it by sending it a voltage? thanks

Re: IACV
 

everytime i had a iacv code the iacv had nothing wrong with it
it was the ecus fault

but thats just me

Re: IACV
 

well do i get a new chipped ecu or is there a different way to solve this problem?

Re: IACV
 

try a good known ecu
if its easier to try a new iacv first then do that

Re: IACV
 

mine have crome and the IACV disable script from xenocron, it works perfectly

Re: IACV
 

x2

Re: IACV
 

Have you tried swapping on another IACV? Also, keep in mind you will still need to flow coolant through the valve for it to work correctly.