5th gend series vtec motor
14b turbo
custon manifold
custom downpipe
front mount
custom piping
typr s BOV
dsm injectors
all hardware
and either the hack or uberdata as management
all set to around 8-9 psi
think the stock motor will hold for a long while

 

yeah as long as its tuned right. I have a 14b on a d16z6 at 11 psi on the hack and it has been a trooper (knock on wood).

 

lol, with completely stock internals?

 

DOnt waste your time and do it twice. Go Uberdata in the first place.

 

Why does everybody ask...stock internals when someone is boosting 11-12 psilol
I wouldn't boost a build block 11-12 psi...it wouldn't see less then 15 psi daily.
Not worth pouring cash into a block and only boosting 11-12 psi...a stock block can tae 11-12 psi easy..if you tuned it right.

 

unless you already bought the 14b...dont buy one

get a ------- T3 like either a .42/.48 if you want a quick spool or a .48/.60 for more power

t3 = better flanges and easier to wrok wtih and swap

 

the stock d16 blocks can handle alot more than everyone thinks, you just hear otherwise from retards who try to do it with stock injectors and a shitty FMU, because their setup sucked and they blew it up.