how many people are running 8psi or so on stock blocks more or less
#1
how many people are running 8psi or so on stock blocks more or less
more or less as in metal 3 layer and arp headstuds. sohc zc in particular
I'm rebuilding a block and thinking about just rebuilding it stock, but measure/inspect everything and replace everything that needs to be. I've been running the sohc zc in my car now from 4-6, but I wan't take it up a little to 8-10. I'm really not addictied to boost, cause I barely get on it as is, DD, not race car.
I'm rebuilding a block and thinking about just rebuilding it stock, but measure/inspect everything and replace everything that needs to be. I've been running the sohc zc in my car now from 4-6, but I wan't take it up a little to 8-10. I'm really not addictied to boost, cause I barely get on it as is, DD, not race car.
#3
Re: how many people are running 8psi or so on stock blocks more or less
but why go through a "rebuild" just to leave all the stock ---- in there. On a d-series its not worth it imho. You'll spend too much on gaskets, bearings, rings, a timing belt, etc and end up with just a stock motor that you will end up either blowing up or tearing apart again to add in forged ---- anyway. If it runs and isnt already torn apart or smoking, leave it alone.
#8
Re: how many people are running 8psi or so on stock blocks more or less
Originally Posted by Stealthmode
10 pounds is still my quota. Nothing ever under that, EVER, and always on a basemap. You'll be *mint*
I pulled the stock jdm d15b that I was pushing 15psi on for a solid year with (on a basemap), and put that motor in my dd crx. the motor is still in perfect condition.