How-To make a B series turbo manifold
Guest
Posts: n/a
Re:How-To make a B series turbo manifold
Originally Posted by fatrhino
yes it can be done. order a flange and a bunch of mandrel bends and a flange for you're turbo and weld em together. or go to a muffler shop and give em $800 or so
piping kit for b series is about 250. but go to cheap turbo buy the bseries head flange, buy the t3 flange, dp flange.
go to jcwhitney and buy 3 ubends of stainless steal and you can make on.
will it be good and have flow is up to how you design it.
personally i can get you a drag one, new for about 400.
or
ebay always has em.
1.0 BAR
Joined: Dec 2002
Posts: 554
Re:How-To make a B series turbo manifold
Yes, you can weld your own manifold.
I made mine in a long weekend. Bought 1/2 inch steel plates to use as base against the engine and to mount the turbo.
At a local plumber i bought weldable bends and some steel tubing (believe the diameter was 1.25 inch).
Total price of the manifold was about 50 Euro (50 dollars).
Pieter
I made mine in a long weekend. Bought 1/2 inch steel plates to use as base against the engine and to mount the turbo.
At a local plumber i bought weldable bends and some steel tubing (believe the diameter was 1.25 inch).
Total price of the manifold was about 50 Euro (50 dollars).
Pieter
