How-To make a B series turbo manifold
12-23-2002, 10:07 PM
#13
0.0 BAR
Join Date: Dec 2002
Posts: 33
Re:How-To make a B series turbo manifold
I made my own for about $20. There is a pic of it here:
http://www.honda-tech.com/zerothread?id=354259
The manifold still works, no leaks or cracks. Just your basic T's and Elbows from Home Debot. Oh ya, Im redoing my manifold for equal runner, so if anyone wnats this...$50 plus shipping gets it.
http://www.honda-tech.com/zerothread?id=354259
The manifold still works, no leaks or cracks. Just your basic T's and Elbows from Home Debot. Oh ya, Im redoing my manifold for equal runner, so if anyone wnats this...$50 plus shipping gets it.
12-24-2002, 12:01 AM
#15
0.0 BAR
Join Date: Dec 2002
Posts: 5
Re:How-To make a B series turbo manifold
If you want to make like your own turbo manifold check out this website I have found. (very informative)
http://www.sdsefi.com/techheader.htm
I made my kit from someone off of ebay for $165.00 which took me over 2 months to recieve it other people had the same problem so he's no longer on ebay.
Tommy,
http://www.sdsefi.com/techheader.htm
I made my kit from someone off of ebay for $165.00 which took me over 2 months to recieve it other people had the same problem so he's no longer on ebay.
Tommy,
12-24-2002, 02:36 AM
#17
1.0 BAR
Join Date: Dec 2002
Posts: 554
Re:How-To make a B series turbo manifold
Used an old electrode welder. The manifold is still not really finished, have to grind the welds a bit and put on some sort of heat-resistant coating or paint.
I guess the building could be done even faster, but i had severe space limitations (only had 20 cm or 7.9 inch of space between the block and radiator) so had to be really careful where to put the turbo and the manifold bends.
http://www.sdsefi.com/techheader.htm
is where i got the idea from to use the weldable bends
@shortyz
made the collector from the tubing
Pieter
I guess the building could be done even faster, but i had severe space limitations (only had 20 cm or 7.9 inch of space between the block and radiator) so had to be really careful where to put the turbo and the manifold bends.
http://www.sdsefi.com/techheader.htm
is where i got the idea from to use the weldable bends
@shortyz
made the collector from the tubing
Pieter
12-24-2002, 04:41 PM
#18
0.5 BAR
Join Date: Dec 2002
Posts: 143
Re:How-To make a B series turbo manifold
i like it dutchpug! never seen a TU blacktop look that good..
i may be making an equal length tubular manifold for my GT Turbo when i get my rollerbearing T28 because the stock gtt manifold is crappy
i may be making an equal length tubular manifold for my GT Turbo when i get my rollerbearing T28 because the stock gtt manifold is crappy
12-25-2002, 05:58 AM
#20
0.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 47
Re:How-To make a B series turbo manifold
can anyone out here make me a B series Turbo header to fit onto my B16a SiR II. The header got to have T3 flanges to fit the T3/T4 turbo. and how much you would charge and shipping prices to Oakland,CA
