Forced Induction Custom FI Setup Questions

fuel is cutting out at 6000rpms!!!! (any more ideaas?)

Thread Tools
 
Search this Thread
 
Old 07-25-2004, 04:27 PM
  #21  
1.0 BAR
Thread Starter
 
pa2play's Avatar
 
Join Date: Jan 2004
Posts: 585
Default Re:fuel is cutting out at 6000rpms!!!! (any more ideaas?)

ok, I put 1 step colder plugs and gapped them to .30, nothing ,still does it, as far as the vtec thing, I have a d16Z6, they don't have the vtec, they are a pissy 125 hp engine. just checked oil, it looks good.
pa2play is offline  
Old 07-25-2004, 04:45 PM
  #22  
3.0 BAR
 
88dx's Avatar
 
Join Date: Nov 2003
Posts: 5,838
Default Re:fuel is cutting out at 6000rpms!!!! (any more ideaas?)

I have a d16Z6, they don't have the vtec, they are a pissy 125 hp engine. just checked oil, it looks good.
D16z6 are SOHC Vtec found in 92-95 ex and si models
88dx is offline  
Old 07-25-2004, 04:50 PM
  #23  
1.0 BAR
Thread Starter
 
pa2play's Avatar
 
Join Date: Jan 2004
Posts: 585
Default Re:fuel is cutting out at 6000rpms!!!! (any more ideaas?)

must be a different vtec than in the '00 si, because when that vtec kicks in, you can feel it and hear it.
pa2play is offline  
Old 07-26-2004, 04:14 AM
  #24  
3.0 BAR
 
whiterice's Avatar
 
Join Date: Jun 2003
Posts: 3,975
Default Re:fuel is cutting out at 6000rpms!!!!

Originally Posted by pa2play
stock ECU and what was that about
Originally Posted by hybrdcivic95
no such thing as a high flow cat....
http://cgi.ebay.com/ebaymotors/ws/eB...category=33629
that is not a high flow cat. that is a just a resonator and does not convert any emissions.
high flow cats cost more. random technologies is one of the better ones to get.
whiterice is offline  
Old 07-26-2004, 08:02 AM
  #25  
1.0 BAR
Thread Starter
 
pa2play's Avatar
 
Join Date: Jan 2004
Posts: 585
Default Re:fuel is cutting out at 6000rpms!!!! (any more ideaas?)

Originally Posted by chingro4u
-Ground the VTEC oil pressure wire (wire from ECU)
*by doing this you bypass the sensor* if this fix your problem then you know the oil sensor is not working

-Try using another ECU.
I have an oil press gauge and it looks good and I checked the oil, looks good, any other ideas?
pa2play is offline  
Old 07-27-2004, 03:37 PM
  #26  
0.5 BAR
 
chingro4u's Avatar
 
Join Date: May 2004
Posts: 193
Default Re:fuel is cutting out at 6000rpms!!!! (any more ideaas?)

if you are using a stock ECU (P28 i assume), and your oil is good, and pressure is good,AND you checked the VTEC oil pressure sensor, then maybe it is not a FUEL cut off, maybe it is your spark, check ignitor and coil (replace them).

chingro4u is offline  
Old 07-27-2004, 05:56 PM
  #27  
1.0 BAR
Thread Starter
 
pa2play's Avatar
 
Join Date: Jan 2004
Posts: 585
Default Re:fuel is cutting out at 6000rpms!!!! (any more ideaas?)

what's an ignitor? Also, I don't know a lot about the coil, what exactly does it do, and what part would it have in high RPM's?
pa2play is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
imburne
Hybrid/Tech
11
07-05-2007 04:19 AM
HMTguy
General Discussion
0
07-01-2007 11:55 PM
pa2play
Forced Induction
5
07-26-2005 01:06 PM



Quick Reply: fuel is cutting out at 6000rpms!!!! (any more ideaas?)



All times are GMT -5. The time now is 05:25 PM.