chingro4u

check your oil......

maybe your ECU is not picking up any oil pressure from the VTEC OIL PRESSURE sensor.

SpankedYA!

Have you ever changed the fuel filter?

pa2play

oil is good, and no I havn't ever changed my fuel filter. I'll try that, but if it was the fuel filter, wouldn't it kinda act up more that at WOT at 6000rpms?

chingro4u

what ECU are you using?

pa2play

stock ECU and what was that about http://cgi.ebay.com/ebaymotors/ws/eB...category=33629

pa2play

took out my catilac converter, still does it. It runs great and doesn't do it when it just warms up, but after the 3 or 4th run, it starts to cut out again.

pa2play

Someone on honda-tech suggested this... "had a similar problem and it was because my knock sensor pulled timing because I was almost detonating. Love that little invention." what should I do if it is my knock sensor, and why did it just start going off? I know i'm using 92 octane, & the weather has been in the 70's here in Michigan.

chingro4u

SOHC motors dont have knock sensors

chingro4u

do these one at a time and test car after each to figure out the problem.

-check oil level

-GAP your spark plugs .30 then test car.

-Ground the VTEC oil pressure wire (wire from ECU)
*by doing this you bypass the sensor* if this fix your problem then you know the oil sensor is not working

-Try using another ECU.

88crex

i thought y8's had a knock sensor. the newer ones at least.