Finally finished my setup, take a look, lots of pics
#12
Re: Finally finished my setup, take a look, lots of pics
Originally Posted by djfob
nice work, all my dad does is stands around and tells me my ***** gonna blow up :P
#13
Re: Finally finished my setup, take a look, lots of pics
Originally Posted by shanerv
that b7 @10psi is gonna own you. keep her low they suck for boost buddy of mine just granded a b7 @9.5 psi with no detionation
#14
Re: Finally finished my setup, take a look, lots of pics
it's not the size of the turbo it's the power and boost. and he was running a 14b we figured around 200whp or a little less.and a 14b is a bit bigger then a te04h if I am correct. and also if you ran 16psi for real you got lucky cause that motor will not take it.
#16
Re: Finally finished my setup, take a look, lots of pics
I'm not sure what it was really at but it spiked hardcore and EcuControl said 16.5 lbs.
Yeah exactly so, I would think 10 lbs on this turbo would prolly make around 185whp, I'm keeping it rich (11.3ish:1) and the timing is pulled .9 per psi
Fancy? It cost me about $6 total, and I just didnt want those ugly resistors hanging out to feel the wrath of the elements.
Originally Posted by shanerv
it's not the size of the turbo it's the power and boost. and he was running a 14b we figured around 200whp or a little less.and a 14b is a bit bigger then a te04h if I am correct. and also if you ran 16psi for real you got lucky cause that motor will not take it.
Originally Posted by BoosTedZSix
whats with all these fancy resistor boxes lately? :P
#17
Re: Finally finished my setup, take a look, lots of pics
I've been running it for a little over a week or so at 10 lbs with no problems, its running rich, (14.3:1 in vac, and 11.2:1 in boost). The wastegage arm keeps falling off the little flapper though because I didnt put the coder pin in (the old one broke off in the hole and wont come out), what can i stick on the peg that the arm goes over to keep that thing from falling off?
I'm still waiting for a reply on my stickers.
I'm still waiting for a reply on my stickers.
#18
Re: Finally finished my setup, take a look, lots of pics
you could just go to the hardware store and buy a cotter pin or wrap wire through it.
Those teo4hs blow, I'm glad I sold mine, the down pipe was a complete bitch too.
Those teo4hs blow, I'm glad I sold mine, the down pipe was a complete bitch too.
#19
Re: Finally finished my setup, take a look, lots of pics
Originally Posted by ifly87
I've been running it for a little over a week or so at 10 lbs with no problems, its running rich, (14.3:1 in vac, and 11.2:1 in boost). The wastegage arm keeps falling off the little flapper though because I didnt put the coder pin in (the old one broke off in the hole and wont come out), what can i stick on the peg that the arm goes over to keep that thing from falling off?
I'm still waiting for a reply on my stickers.
I'm still waiting for a reply on my stickers.