Hey i got my knock off tial wastegate and i can't figure out how to install it it came with

-2 fittings for vacuum
-2 screwes to screw into the wastegate for the 2 fittings
-2 plates
-1 washer
-2 gaskets
and 2 bolts


1. what does the each vacuum hose do? 1 on top and one on side?

2. where does the metal spacer go? and do i use any metal flanges and where do they go? help me out, thanks

 

You use one of the "VAC" fittings and it goes on the lower port on the side. That hooks to your boost/VAC source. The other one is not used unless you have an EBC. The smaller washers go on the screws between the fittings.

The big ring washer goes inside the wastegate between the wastegate and the mating surface(manifold).

Don't use the gaskets. They are ---- and will blow out. It will seal without them.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

so for the top vac source just dont' use it or plug it?

 

Don't use it and don't plug it.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

alright, sweet thanks boost