|
Re: Experience with OBX LSD...
I've used one in my ZC Tranny and now is getting swapped over to a Hyrdo Tranny. Just make sure you tighten everything down before installing. I thought I did, but I missed one, It backed out a tiny bit and when I pulled the tranny apart it was riding the housing.
|
Re: Experience with OBX LSD...
got about 5k miles on mine in a z6 tranny. love it. ive had the axles out and they dont stick...the only problem i had with mine was the bolts that go into the ring gear....the heads on the bolts needed to be ground down a little (the diameter of the head) cause they were hitting the housing and it was causing them to go in crooked. a few seconds with a bench grinder and they went in perfect.
|
Re: Experience with OBX LSD...
Originally Posted by hyper4mance2k
OBX stands for. Other Brands are all eXtremely better than us. But they work, waste of money in my oppinion. So just save up and do it right the first time.
|
Re: Experience with OBX LSD...
$70 for new bearings, $18 for the speedo drive ring (I keep spares!) then when the bearings are pressed onto the OBX, you can compare overall width.
Using the measurements you get a real close number on which shim to use. B16/B18 oil control ring, .5mm thick. The thinnest shim you can get from Honda is 1.0mm. |
Re: Experience with OBX LSD...
Hey Mista. What exactly is the oil control ring, and where is it on my OBD1 LS Donor motor?
Edit: You mean the shims on the oil ring on the piston? K |
Re: Experience with OBX LSD...
Originally Posted by FooK
Mista Bone says these things have good results in lots of cars now. You can buy varying sized shims from the dealerships.
However, a limited slip is not part of a turbo kit, so I wouldn't have chosen the forced induction section. Just a thought. |
Re: Experience with OBX LSD...
Originally Posted by JK_Motorsports
Hey Mista. What exactly is the oil control ring, and where is it on my OBD1 LS Donor motor?
Edit: You mean the shims on the oil ring on the piston? K |
Re: Experience with OBX LSD...
Ah the actual Piston Ring. I though you meant the little shim for the oil ring. Will do as my LS has to be bored over anyways for it's build.
|
Re: Experience with OBX LSD...
Originally Posted by hyper4mance2k
OBX stands for. Other Brands are all eXtremely better than us. But they work, waste of money in my oppinion. So just save up and do it right the first time.
Thanks alot guys for all the help...I let you know when I finally get this set up. It might even be next season before I finally get it done... |
Re: Experience with OBX LSD...
Originally Posted by hyper4mance2k
OBX stands for. Other Brands are all eXtremely better than us. But they work, waste of money in my oppinion. So just save up and do it right the first time.
ill take the firsthand experiences over any comments like yours |
| All times are GMT -5. The time now is 07:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands