evo3 16g on b16 and 300whp

Reply Subscribe

Thread Tools

Search this Thread

Oct 26, 2007 | 12:14 PM

#41

umair

Thread Starter

0.0 BAR

Joined: Oct 2007

Posts: 27

Re: evo3 16g on b16 and 300whp

Quote:

Originally Posted by SinisterCRX

He's probably talking about the ching chong meow "evo3 16g" from ebay.

Have fun with that turbo, kiddo. If you want one I know where you can get one cheap

i am not talking about those turbos.

Oct 27, 2007 | 12:17 AM

#42

seerex

0.0 BAR

Joined: Jun 2003

Posts: 0

Re: evo3 16g on b16 and 300whp

Quote:

Originally Posted by aero

YES IT WILL. The Evo 3 16g bolts straight up to any 14b 16g manifold it is single scroll. You are thinking of the newer evo turbos, which are twin scroll.

:1 I didn't see the evo 3 part. Yes the older ones will bolt up, but the new one will not.

Oct 27, 2007 | 01:02 AM

#43

Slo_crx1

3.0 BAR

Joined: Aug 2003

Posts: 4,664

From: NE-PA

Re: evo3 16g on b16 and 300whp

Quote:

Originally Posted by Schwitzer Turbo

are you talking about a Mitsi Tdo4H 16G?

First off, you have the numbering wrong...it's MHI Tdo5H 16g. The Evo3 variants use a 7cm^2 housing and will start to come on boost around 2800-3k rpm's. How do I know? I had one on my b16. It's a great turbo for daily driven status, but you'll need some high pressure numbers to start knocking on that 300whp door.

Quote:

Originally Posted by crxvtec91

No it will not, not even close. The 16g from the evo is a twin scroll and the flange is way different!! Not even close enough to redrill.

Uhh, wrong Evo turbo. You're thinking of the MHI Tdo5HR 16g6 (which is basically a small 20g, and the compressor housing is huge in comparison to the Evo3 variants) which is the twin scroll reverse rotation housing. IIRC this turbo didn't make an appearance until the Evo 7's and used a 9.8cm^2 housing. This turbo is also found on '03 and '04 Evo 8's. '05 and up jumped to a 10.5cm^2 housing, and the last release models of the '06 Evo 9 MR had a 20g with the 10.5cm^2 housing.