DSM Injectors don't work with D-Series Motors
 

I'm PISSED! Whoever the ---- said DSM Injectors work with D-Series motors needs to be shot in the ------ head! I've done everything I can to make the injectors fit and they don't. The plug does not even come close to matching the injector. So take my advice and don't try to install blue top dsm injectors on your civic.

Re:DSM Injectors don't work with D-Series Motors
 

------ nOOBie, you have to "customize" them. you can't just take them and try and put them in. take your old injector seals and bore them out a little so that they will fit around the DSM's then "customize" the plugs (read that as "hack them so they fit"). that should work.

next time read the tech article before posting stupid ---- about how they don't work with the D when about 95% of people on this site are running them right now.

now goto the general forum and post porn to make up for it ;).

Re:DSM Injectors don't work with D-Series Motors
 

They plug and play on my EF except for the rubber seals that needs to be bored out a bit.
OBD0 plugs fits without any mod's...on OBD1 you need to take of a piece from the injector plugs...

Re:DSM Injectors don't work with D-Series Motors
 

Seals are not the problem...it's the fact that I will have to grind almost all of the plastic off of the injector to make it fit. I did everything the tech article told me to do and it doesn't work. You guys mentioned OBD0 and OBD1 what about OBDII which is what I am with my Y8? Also the pins in the DSM injectors or almost twice as wide as the pins in my Y8's injectors.

Re:DSM Injectors don't work with D-Series Motors
 

Wow before you spout off like a complete ------- retard do more research. I have a 96 hatch with a Y8 intake on a Y7 and my DSM 450's fit fine. Grind the seals. change to an OBDI injector clip. Maybe you should take your car somewhere to have the work done. It may not be safe to drive if you finish it! :-*

Re:DSM Injectors don't work with D-Series Motors
 

obd II injectors clips won`t work

Re:DSM Injectors don't work with D-Series Motors
 

Where is that post..i remember seeing it but cant find it again..

Re:DSM Injectors don't work with D-Series Motors
 

your a ------- idiot. i think everyone one here using the dsm injectors. read the god damn tech article on it and stfu

Re:DSM Injectors don't work with D-Series Motors
 

i have a 99 with a Y8 and mine fit perfectly after hacking them up a little.

you have to take the little blue thing out of the inside of the clip. i hacked mine up pretty good but i electrical taped them biaaatches in ;D. maybe i'll get some OBD1 clips someday but probly not anytime soon since they still work.

Re:DSM Injectors don't work with D-Series Motors
 

Yep. Pluged right in on my ef. i just put the seals to s drill press and just worked it around the bit. i think it was the easiest thing on the whole turbo setup!

Re:DSM Injectors don't work with D-Series Motors
 

I think the title of this post should have been "Problem with 450cc's install, please help." you just came off all to wrong.

Re:DSM Injectors don't work with D-Series Motors
 

Sorry I'm late guys. Is it to late to flame? ???

Re:DSM Injectors don't work with D-Series Motors
 

---- I didn't do ---- all to the crx, Lubed up the stock seals with some ky and tightend the ------ fuel rail till she was balls deep. Clips pluged right in. 5 minutes max ::)

Re:DSM Injectors don't work with D-Series Motors
 

never

Re:DSM Injectors don't work with D-Series Motors
 

Heres a solution give me the 450cc injectors and go out and buy some RC ones and have machine shop install em. ;)

Naw but for real just dont say they dont fawking work. That make the site look like we dont know what were fawking talking about in the tech area. When really you dont know how to fawking install anything.

Re:DSM Injectors don't work with D-Series Motors
 

Aww come on!You know its never too late to flame.

I just think this kid probably got duped into some injectors that arent even DSM 450s.

Post a ------- pict.I ran some DSM 390s.They are the same as 450s and the worked for me.

Re:DSM Injectors don't work with D-Series Motors
 

He's OBD2. :P They aren't going to just plug in.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:DSM Injectors don't work with D-Series Motors
 

obd2 injector clips don't work. Get obd0 or the oem dsm plugs.

Stan

Re:DSM Injectors don't work with D-Series Motors
 

public embarassment is a bitch.

lol this topic makes u look like a retard.

Re:DSM Injectors don't work with D-Series Motors
 

they don't work?
i better take mine out. damn.

Re:DSM Injectors don't work with D-Series Motors
 

---- i better sell mine for cheap then after spending $40 on injectors and $60 on having them cleaned and blueprinted. Damn now i dont know what to do for fuel management i guess ill just have to get a OBX fuel regulator.

Re:DSM Injectors don't work with D-Series Motors
 

hahaha frigging shortyz

Re:DSM Injectors don't work with D-Series Motors
 

im sorry but your a ------- idiot... read the faq and ---- you fucktard. i made alot of hp on some dsm injectors......faggot...

Re:DSM Injectors don't work with D-Series Motors
 

:D

Re:DSM Injectors don't work with D-Series Motors
 

He may be a ------- idiot or he might have a freak motor like mine. I didn't have any seals, nothing but metal and my injectors still wouldn't fit. I had to remove metal on the injectors, no ----!

Re:DSM Injectors don't work with D-Series Motors
 

Then you didn't have DSM injectors. :P If they wouldn't fit into the manifold even without the bushing, those were some oddball injectors.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:DSM Injectors don't work with D-Series Motors
 

hahaha this guy must be so embarased, hell prob never post on HMT again

Re:DSM Injectors don't work with D-Series Motors
 

crxdan, you still running the 87 civic with the d16a1?
same guy on redpepper?

Re:DSM Injectors don't work with D-Series Motors
 

---- you dont even have to machine the seals, just lube them and tork them... the plugs go to the junk yard and search the cars for clips that fit the injectors...if I was was home I would donate some clips...dont let this get you down through keep your head up and recover.

Re:DSM Injectors don't work with D-Series Motors
 

I also used the KY to slam the biatches in too :)
Works great and it feels soooooo tight !!

Re:DSM Injectors don't work with D-Series Motors
 

holy ----...let the flaming begin. ;D

Re:DSM Injectors don't work with D-Series Motors
 

------ A this thread was good for a laugh. I should visit you guys more often.

Re:DSM Injectors don't work with D-Series Motors
 

oh yes they do ;D

http://www.newbieforces.com/files/66...6666666666.jpg


http://www.newbieforces.com/files/44...4444444444.jpg



if you grinded down the actual injector, you're fucked and they'll never fit anything right again, you can always change the clips on your car, so ---- those up before you ---- up the injectors. and don't come in here bitching b/c you didn't do enough research to find out they work best with obd0 and obd1 clips ::)

Re:DSM Injectors don't work with D-Series Motors
 

you forgot to secure them with duct tape or a ziptie.

Re:DSM Injectors don't work with D-Series Motors
 

actually, it was a very snug fit, i ran them like that for about 5 months with no problems.

Re:DSM Injectors don't work with D-Series Motors
 

wheres ur resistor box?

Re:DSM Injectors don't work with D-Series Motors
 

Re:DSM Injectors don't work with D-Series Motors
 

awsome, I like ;D

Re:DSM Injectors don't work with D-Series Motors
 

:o :o :o
LOL
Welcome to www.homemadeturbo.com 8) :P

Re:DSM Injectors don't work with D-Series Motors
 

Do you have the right DSM injectors?

I mean, there's the Diamond Star Motors injectors and then there's the D Series Motor injectors.

If it says v-tech on the side of the injector, you're in good shape. :P