DSM boy turned HMT guy?! what?
#11
Re:DSM boy turned HMT guy?! what?
The "lost DSM boy" is gonna get lost in the DPFI-MPFI swap that will be your big obsticle (even thought its pretty easy) in doing your setup.
5psi feels ok, 14b's spool rather fast on a honda d16/d15's, remember 5psi would feel like nothing on your dsm. You may want to add a intercooler to your list, especially with just a FMU. I'd run a 8:1 or 10:1 disc, FMU's cost about 60-125 on ebay.
Jeff
5psi feels ok, 14b's spool rather fast on a honda d16/d15's, remember 5psi would feel like nothing on your dsm. You may want to add a intercooler to your list, especially with just a FMU. I'd run a 8:1 or 10:1 disc, FMU's cost about 60-125 on ebay.
Jeff
#12
Re:DSM boy turned HMT guy?! what?
Originally Posted by b16_destroyer
Wombat, you don't happen to have a white Talon with a fully built stroker motor, 100hp shot nitrous, huge turbo...and if you do, I know who you are And if you are then just to let you know that my CRX will take your Talon anyday. That's right, once you finish putting it back together let me know so you can have your *** handed back to you
Also, the 11 second Miata is coming for you!!! You know whom I mean.
Also, the 11 second Miata is coming for you!!! You know whom I mean.
#13
Re:DSM boy turned HMT guy?! what?
hey, don't mean to dig up an old thread...
no, I don't have a white 1g with a 2.4l 4g63/64 hybrid. sorry and if a fully built stroker with a 100shot of Nitrous can't beat an 11 sec miata, that guy needs help driving/tuning. Mildly built 2.4l's without nitrous are running deep 11's...
As far as the IC goes, I am going to be using the Talon SMIC.
For MPFI: me and a friend were thinking about this: PW0 or PR3 ECU with all the fun MPFI resistor box crap, and then the 2 vtex wires. Im thinking these ECUs because my friend says they are from Vtec motors (?) and that way I shouldn't need an SAFC to add more fuel for vtec.
Also as far as the "you'll want more than 5psi" thing. I agree, but I do have the self controll to hold myself back. Its a daily driver that sees about 35 miles a day. Im confidant that 5psi will be enough to keep me happy until the talon is running. then I'll have 25psi
no, I don't have a white 1g with a 2.4l 4g63/64 hybrid. sorry and if a fully built stroker with a 100shot of Nitrous can't beat an 11 sec miata, that guy needs help driving/tuning. Mildly built 2.4l's without nitrous are running deep 11's...
As far as the IC goes, I am going to be using the Talon SMIC.
For MPFI: me and a friend were thinking about this: PW0 or PR3 ECU with all the fun MPFI resistor box crap, and then the 2 vtex wires. Im thinking these ECUs because my friend says they are from Vtec motors (?) and that way I shouldn't need an SAFC to add more fuel for vtec.
Also as far as the "you'll want more than 5psi" thing. I agree, but I do have the self controll to hold myself back. Its a daily driver that sees about 35 miles a day. Im confidant that 5psi will be enough to keep me happy until the talon is running. then I'll have 25psi
Thread
Thread Starter
Forum
Replies
Last Post
1991civicsi
General Discussion
4
02-08-2009 11:51 AM
nigel
General Discussion
15
02-26-2004 01:50 AM
honda_joe
General Discussion
30
12-29-2003 08:41 PM