Downpipe clearence need help
#11
Re: Downpipe clearence need help
ahh if i read this about a minute before ordering a big roll from hamiltonmarine.com, ill try to go with the 1.5 and if it does touch the alternator ill have it banged a tiny bit and heat wrap it, also what do i use 2 hold the wrap just some regulat hose clamps?
#12
Re: Downpipe clearence need help
Originally Posted by chr1z
ahh if i read this about a minute before ordering a big roll from hamiltonmarine.com, ill try to go with the 1.5 and if it does touch the alternator ill have it banged a tiny bit and heat wrap it, also what do i use 2 hold the wrap just some regulat hose clamps?
Sorry. Uhhhh....yea I guess. Wrap it tight kinda like you would for an ankle wrap. Starting and layering over it, stretching, pulling tight, wraping down on an angle a little further down on the downpipe, repeat. Hose clamps on the ends I guess. I never did it, but it sounds savvy. Good luck and post in General Disscussion when it's done with some numbers. A Hyundai.....HMT has expanded.
JP
#19
Re: Downpipe clearence need help
yea its the turbo scoupe manifold, the scoupes use the same 1.5L alpha motors, the turbo scoupe uses a t15 oil/water cooled around 115 hp at like 5 psi with oil sqirter pistons but the compression sucks .
Thread
Thread Starter
Forum
Replies
Last Post