DIY Manual Boost Controller Parts
#1
DIY Manual Boost Controller Parts
For those of you building the manual boost controllers where can I look besides a hardware store for the Male/Female 1/4" x 3/16" Hose Barbs. I checked all the local hardware stores and the smallest they had was 1/4" x 1/4". Any input...?
Also where can I find the ball bearing...and the spring is that just from a clicky pen?
Also where can I find the ball bearing...and the spring is that just from a clicky pen?
#2
Re:DIY Manual Boost Controller Parts
If you have a Home Depot, lookin the Air Tool Section they should have what you need.
The 1/4 Ball bearing you can find at a bicycle shop.
And the spring you will need to find one stronger, they have strong springs here at a local hardware store, so I can't really tell you where the get them where you are.
Tim
The 1/4 Ball bearing you can find at a bicycle shop.
And the spring you will need to find one stronger, they have strong springs here at a local hardware store, so I can't really tell you where the get them where you are.
Tim
#3
Re:DIY Manual Boost Controller Parts
Originally Posted by Hyundai4G63T
If you have a Home Depot, lookin the Air Tool Section they should have what you need.
The 1/4 Ball bearing you can find at a bicycle shop.
And the spring you will need to find one stronger, they have strong springs here at a local hardware store, so I can't really tell you where the get them where you are.
Tim
The 1/4 Ball bearing you can find at a bicycle shop.
And the spring you will need to find one stronger, they have strong springs here at a local hardware store, so I can't really tell you where the get them where you are.
Tim
Thread
Thread Starter
Forum
Replies
Last Post