Day Full of no look tack welding
#1
Day Full of no look tack welding
Well I spent the day at the shop today, this is what I got done
1. Mounted JRC 8", hangs low like hotsex's big cooler, guess its time for a lip. No pic, its dark and my camera sucks. I'll get one tomorrow.
HERE IT IS
2. Got dumptube figured out on downpipe, tacked up. I'm actually going to attempt welding this stuff myself, we just have very little wire at the shop, so I'll do it at work monday. Pics of the DP now.
3. Built intercooler piping, I had the intercooler to TB piece all one piece, but in the end it was just gonna be too difficult to maneuver around, plus i still have to attache the BOV flange, and then it woulda never been possible. Two pieces it is. I also had to modify that stock 14b outlet pipe, so that it points down, McMaster bend to the rescue. Pics of that stuff:
4. I clocked my center section a bit, so that the oil return points downward a little better, dont want a kinked return.
I'm really excited to go to work monday and try welding this stuff up on my own. I am getting better at it, steadier hand and what not.
1. Mounted JRC 8", hangs low like hotsex's big cooler, guess its time for a lip. No pic, its dark and my camera sucks. I'll get one tomorrow.
HERE IT IS
2. Got dumptube figured out on downpipe, tacked up. I'm actually going to attempt welding this stuff myself, we just have very little wire at the shop, so I'll do it at work monday. Pics of the DP now.
3. Built intercooler piping, I had the intercooler to TB piece all one piece, but in the end it was just gonna be too difficult to maneuver around, plus i still have to attache the BOV flange, and then it woulda never been possible. Two pieces it is. I also had to modify that stock 14b outlet pipe, so that it points down, McMaster bend to the rescue. Pics of that stuff:
4. I clocked my center section a bit, so that the oil return points downward a little better, dont want a kinked return.
I'm really excited to go to work monday and try welding this stuff up on my own. I am getting better at it, steadier hand and what not.
#9
Re: Day Full of no look tack welding
If you decide to run the 14b like that, you might have to yank the PS. My buddy used the stock J pipe and it didnt fit with the PS, so we took it off, were going to try and use some sort of u bend but we havent got a chance to test anything yet. Post up pics once you get it all mounted up, Id like to see.... good luck with the rest of the setup.
Blaze
Blaze
Thread
Thread Starter
Forum
Replies
Last Post
fourthgenhatch
Fabrication
52
06-03-2006 05:41 PM
Anubis_4_99
Turbo Parts For Sale
14
03-21-2006 08:55 PM