HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Cracked Sleeve, Need Opinions and Help~ (https://www.homemadeturbo.com/forced-induction-7/cracked-sleeve-need-opinions-help%7E-17368/)

45psi 03-16-2004 11:52 AM

Re:Cracked Sleeve, Need Opinions and Help~
 
cheap route: new bottom end

money falling out of your pockets: quality sleeve job

ForcedAir 03-16-2004 03:25 PM

Re:Cracked Sleeve, Need Opinions and Help~
 

Originally Posted by digital sol
Alright well after going to the shop this afternoon one of the sleeves is cracked.

If sleeving is the route you would like to go. Get ahold of me and I'll help you out in this time of uber BS. (to say the least)

PM, email or call me toll free 877-367-2332 (to save you even more money). We'll get you straight. I'll also try to assist where I can regardless if you decide to go sleeving or not.


turboboy 03-16-2004 04:03 PM

Re:Cracked Sleeve, Need Opinions and Help~
 
that price cant be right on the replacement sleeve...how come there is a "flanged one" too...whats the difference

digital sol 03-16-2004 04:33 PM

Re:Cracked Sleeve, Need Opinions and Help~
 
thanks for the input. Im waiting to hear back from the shop to see if the entire sleeve is cracked and or which sleeve is cracked. If its the outter stock sleeve and its just hairline and small i can just use a blockguard and be done with it. If its the actualy sport sleeve thats cracked i will have to replace that one sleeve and continue on with the project. Apparently the outter sleeve's *stock sleeves* ave a tendancy to crack easily with the sports on the inside of them and its reccomended to use a block guard with sport sleeves to prevent the stocks from cracking. "Im hoping its just that smal hairline crack and its on the stock sleeve" If thats the case, im just gonna use a blockguard and have it decked for the cometic headgasket, and replace the arp headstuds.

Then ill be boosted again.

Any-1 know a rough estimate on how much a shop typcially cost to install a blockguard and deck for the head gasket.

turboboy 03-16-2004 05:03 PM

Re:Cracked Sleeve, Need Opinions and Help~
 
i thought when you get it sleeved they machine out your stock sleeve entirely...but im ignorant

digital sol 03-16-2004 05:35 PM

Re:Cracked Sleeve, Need Opinions and Help~
 
nope, im just gonna wait to hear back from them, im either going to have the entire thing re-sleeved or just replace what ever sleeve is cracked.

Semnos 03-16-2004 05:44 PM

Re:Cracked Sleeve, Need Opinions and Help~
 
I think he doesn't have the Golde eagle sleeves or the strong sleeves.
Sport sleeves hmmmmm sounds like a low to mid performance sleeve

digital sol 03-16-2004 06:20 PM

Re:Cracked Sleeve, Need Opinions and Help~
 
yea, i think they are a cheaper sleeve, the shop that did the sleeves and such is closed because the owner had a baby so im gonna have to wait until thursday to find out what kinda work they did on this thing. And im hoping i can just replace the cracked sleeve, bore it a little bit but not too mcuh to where i need bigger pistons, and then deck it for the cometic head gasket..

CrxB18c5AllMotor 03-16-2004 11:49 PM

Re:Cracked Sleeve, Need Opinions and Help~
 

Originally Posted by ghettoturbo
that price cant be right on the replacement sleeve...how come there is a "flanged one" too...whats the difference

Very nice civic ghetto turbo!Sry to post in a differnt area major probs

hotrex 03-17-2004 12:25 AM

Re:Cracked Sleeve, Need Opinions and Help~
 
if it needs sleeves, bite the bullet and go ge. or else youll crack it again


All times are GMT -5. The time now is 10:29 AM.


© 2024 MH Sub I, LLC dba Internet Brands