Cracked Sleeve, Need Opinions and Help~
Alright well after going to the shop this afternoon one of the sleeves is cracked. I dont know what im going to do. Im still waiting to hear if the pistons and rods are ok. Basically i can either send the block off and have it resleeved and everything installed again which is gonna cost alot. Or buy a stock bottom end and throw in the pistons and rods from the current cracked motor and just deal with stock sleeves. Or i could see how much a swap would cost but it just seems like there too much invested for me to go a diff motor route.
For the record, i just bought this ------- del sol less then 2 weeks ago. I drove it twice and on the second day i had to have it towed to a shop. It was on 5psi of boost. Obiovusly the guy who sold me the car was a ------- liar and drove it too ---- before he sold it to me. Heres a mod list of what it has, the new fuel management is on the list but not installed yet. I bought it right after i bought the sol but not sure on what im going to do yet. Also, would it be possible to just have 1 cylinder re-sleeved? Only one is cracked but i dunno. Heres a copy of my mod list thus far, even though the fuel mangement isnt installed yet. 1993 Del Sol Si Captiva Blue MOTOR: D16z6 Sport Sleeves JE 9.1 Pistons Eagel Rods Comp Turbo Cam Shaft Crower Valves "ferrera" Springs "crane" Retainers ARP Headstuds Ported & Polished 3 Angle Valve Job Cometic Head Gasket MSD BTM MSD BLASTER COIL MSD 2 Step JG CAM GEAR Pullys Focuz Intake Manifold Alum Flywheel ACT Clutch Underdrive Pulley FUEL MANAGEMENT: 255 Walbro Fuel Pump Aem Fuel pressure regulator E-MANAGE (basic unit) E-MANAGE IGNITION HARNESS E-Manage Pressure Sensor e-manage Pressure sensor harness E-MANAGE INJECTOR HARNESS PROFEC E-01 Profec E-01 Signal harness Remote Switching System Standard A/B usb Cable 450cc Injectors, Clips, Resistor Box TURBO: Greddy 15G turbo kit Greddy FMIC Greddy Type S B.O.V 2.5" Downpipe Greddy Turbo Timer Greddy Oil Catch Can Greddy Catback Exhaust High Flow Cat Mandercoil Plug Wires Greddy Spark Plugs Optima Red Top Battery (located in back) Interior: trunk release added power door locks added push button starter momo steering wheel momo shifter Viper 800 alarm Exterior: C/F hood coil-overs clear corners crossed drilled rotors 14" Steelies |
Re:Cracked Sleeve, Need Opinions and Help~
im sure u can just buy one sleeve,
i think they sell them for 25 bucks each |
Re:Cracked Sleeve, Need Opinions and Help~
Originally Posted by Ravage70
im sure u can just buy one sleeve,
i think they sell them for 25 bucks each im just wondering if you can just have 1 sleeve done, wasnt sure if it was possible. If this is the case then im just gonna have the one cylinder re-sleeved and put the pistons/rods back in and get back to boosting. |
Re:Cracked Sleeve, Need Opinions and Help~
800 bucks holy ----. i did a sleeved ls block for 220 and it came out clean as a mofo.
|
Re:Cracked Sleeve, Need Opinions and Help~
Originally Posted by BoosTedZSix
800 bucks holy ----. i did a sleeved ls block for 220 and it came out clean as a mofo.
|
Re:Cracked Sleeve, Need Opinions and Help~
first of all, if you going to just try and replace one sleeve, or even replace them all with stock sleeves, you would be better off just buying a different short block. as far as 800 bucks to have it sleeved, that's a whole nother story, you're talking about golden eagle or dart sleeves which would be able to handle all the boost you could throw at them, if you can afford it, definitely do this. oh yeah, you're stupid for buying a car that already turbo'd, of course the guy ran it to ----.
|
Re:Cracked Sleeve, Need Opinions and Help~
yeah definatly man i emailed golden eagle about sleeving my d16 block and he quoted me 800 dollars. maybe not exactly that but it was in the 800 dollar range and thats like complete with labor in all. and they have a lifetime warrenty against cracking so u dont have to worry about having to pay for it if it cracks. i think u should hit up golden eagle and see what they have to say
|
Re:Cracked Sleeve, Need Opinions and Help~
i agree. with a mod list like that Im sure you paid a pretty penny on the car... I'd get it sleeved properly.
|
Re:Cracked Sleeve, Need Opinions and Help~
DS-200-010 DARTON REPLACEMENT SLEEVE:D16-75mm $38.25 EA Check Availability
http://www.raceeng.com/showItems.asp...upplier=92009D |
Re:Cracked Sleeve, Need Opinions and Help~
i think the clear corners are what caused it to crack, be sure to replace them with the stock corners after the engine work to ensure you don't blow the engine again.
|
All times are GMT -5. The time now is 06:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands