clocking the turbo???
#1
clocking the turbo???
alright, so i am having trouble getting the oil return to face straight down. The only way i can move the center cartrige is to remove 4 10mm bolts. These bolts won't go in unless the return is about 45 degrees from being straight down.
Any suggestions.
Any suggestions.
#6
Re:clocking the turbo???
Originally Posted by Dawson
what if i just left those bolt out?
Are you a dawson's creek fan? "I don't wanna wait till my turbo creep is over..."
#10
Guest
Posts: n/a
Re:clocking the turbo???
Originally Posted by projekteg
loosen the 13mm bolts (i believe ) that hold the exhaust housing to the center section about half way, bang the ---- out of it with a hammer, rotate it, tighten back up, and post you're next question.