Re: CIVIC SHOOTING FOR 350WHP with Pictures
Originally Posted by boosted_b16
it probably wont idle right because its not tuned properly, and the high temps are probably from the block gaurd :y
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
ah, i see the dipstick now. in that case, like said above, you just have an expensive D15b build, no need in the obd2 style head just increased your compression over stock. and i seriously doubt you will figure out how to run both vtec soleniod properly. unless you are using crome, uberdata, ect... your standalone wont work unless you can set differant rpm determined activation switches. good luck, but in my opinion i would yank all the valvetrain out and use y8 stuff. you wont find any upgrades for the 3stage cam.
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
Originally Posted by z1guy
ah, i see the dipstick now. in that case, like said above, you just have an expensive D15b build, no need in the obd2 style head just increased your compression over stock. and i seriously doubt you will figure out how to run both vtec soleniod properly. unless you are using crome, uberdata, ect... your standalone wont work unless you can set differant rpm determined activation switches. good luck, but in my opinion i would yank all the valvetrain out and use y8 stuff. you wont find any upgrades for the 3stage cam.
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
Why not just leave the y8 head on it then in the first place? maybe I dont understand this correctly but all the d15b head does on a y8 is raise the compression (bad) and have 3-stages of v-tec (which you arent using anyway). At least it looks badass with 2 v-tec solenoids, lol. Good job tho, more than I could show u.
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
Sorry but I don`t see a 350whp motor here, especially with a single cam. Hotrex made 389? with a DOHC. Flame all you want, but sohc`s are gay...I should know, I have one ;)
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
Originally Posted by serialcivic
I wired the head to act as a Single Stage vtec. I wired the 1st vtec to run straight, this keep the car on 16valve all the time, then i used the standalone managment to activate the high vtec. trust me it work perfect.
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
apparantly you didnt read the first page of the post... he has vitara pistons, the more compression you can get out of a head swap the better. He also has rods and all the other supporting mods to get to 350hp. Read up before you go throwing your knowledge around ::)
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
ok, so he has internals, whast that mean :o, i did read the whole thread. and it takes alot of things to get 350whp out of a SOHC... he still basically has a vitara built w/ a useless 3stage vtec head. and is nowhere close to 350whp unless he plans on running 20psi.
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
how do you not think he'll get close to 350 hp with a t3/t4? The fact that he has internals means he can run as much boost as it takes to make 350, but with the parts he has... i cant see it taking more than 17
|
Re: CIVIC SHOOTING FOR 350WHP with Pictures
well, i hope he can, for his sake, but im not gonna argue about it, you could be right, i could be right. im not fimiliar w/ his tuning, and sounds like he isnt either, but i will say good luck to him. ::)
|
All times are GMT -5. The time now is 09:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands