green91

julio, could you take a picture of your turbo.. my turbo has maybe 4-5 inches between the side of the exhaust and the front engine mount.. im thinking its gonna be a bitch to get a DP made.. just wondering if everyone else's is that close too

robs99si

i had about 5inches between the turbo and the a/c compressor. the wastegate flange i got is 1 1/2 inch thick cause it's the factory one so if you have a block off plate and an external wastegate then you'll have more room to play with then i did. i have 3/4inch between the dp and a/c compressor which has a thermal sheet between the dp and a/c compressor. the dp is 2 1/2" od pipe.

green91

i must have my turbo backward from yours, my compressor side is toward where the a/c compressor was, and the exhaust is toward the passenger side. is making pipes 100% easier to run except for DP

rob42386

Yea on 92+ its easier to run like his, since they have all the room in the world! LOL Crossmembers suck

green91

so at home depot the 2" PVC couplers fit 2.5" steel piping??