Charge Pipe Sizing?
#1
Charge Pipe Sizing?
I'm getting to the point that I need to size and order my intercooler piping. I'm going the silicone coupling/clamp route instead of having everything welded (maybe sometime down the road)...
Anyway, how much bigger can the inside diameter of the coupling be over the outside diamter of the charge tubing and still be effective with no leaks?
My turbo outlet is approx. 2-1/4" O.D.
My intercooler inlet is approx. 1-7/8" O.D. (DSM SMIC)
My intercooler outlet is approx. 1-7/8" O.D.
TB Inlet is approx. 2-1/2" O.D.
I obviously need a coupling that goes from 1-7/8" to 2-1/2" (I would assume a 2" to 2-1/2" would work), but I'm not sure about the rest. Could I get away with a 2" I.D. coupling and stretch it 1/4" over the turbo outlet and clamp it 1/8" to the intercooler? Do those things even stretch at all? I have to order about 9 couplings, so I don't want to get it wrong.
By the way, what's the best way to do a 60 degree bend quickly? Could I get a 90 and cut it down? Would there be enough flat space for the coupling to hold?
Sorry for the book. :P
Anyway, how much bigger can the inside diameter of the coupling be over the outside diamter of the charge tubing and still be effective with no leaks?
My turbo outlet is approx. 2-1/4" O.D.
My intercooler inlet is approx. 1-7/8" O.D. (DSM SMIC)
My intercooler outlet is approx. 1-7/8" O.D.
TB Inlet is approx. 2-1/2" O.D.
I obviously need a coupling that goes from 1-7/8" to 2-1/2" (I would assume a 2" to 2-1/2" would work), but I'm not sure about the rest. Could I get away with a 2" I.D. coupling and stretch it 1/4" over the turbo outlet and clamp it 1/8" to the intercooler? Do those things even stretch at all? I have to order about 9 couplings, so I don't want to get it wrong.
By the way, what's the best way to do a 60 degree bend quickly? Could I get a 90 and cut it down? Would there be enough flat space for the coupling to hold?
Sorry for the book. :P
#2
Re:Charge Pipe Sizing?
yeah, your plan sounds fine, as far as slinding a coupler on to a something bigger, you may want to use some soapy water to assist you when you clamp them down, use a small socket for the clamps, not just a screw driver. and yeah, the best way to make your desired anlges, is to just cut them out of a larger angle it will be a lot easier with the pipes right there.
#3
Re:Charge Pipe Sizing?
Originally Posted by projekteg
yeah, your plan sounds fine, as far as slinding a coupler on to a something bigger, you may want to use some soapy water to assist you when you clamp them down, use a small socket for the clamps, not just a screw driver. and yeah, the best way to make your desired anlges, is to just cut them out of a larger angle it will be a lot easier with the pipes right there.
#4
Re:Charge Pipe Sizing?
you know how you tighten hose clamps with a screw driver? well the screw that you tighten, is also a small bolt, if you use a socket wrench (i believe 7 or 8mm.) to tighten them instead of a screw driver, you can get them a lot tigher so they don't pop off
#5
Guest
Posts: n/a
Re:Charge Pipe Sizing?
Originally Posted by Wally
Originally Posted by projekteg
yeah, your plan sounds fine, as far as slinding a coupler on to a something bigger, you may want to use some soapy water to assist you when you clamp them down, use a small socket for the clamps, not just a screw driver. and yeah, the best way to make your desired anlges, is to just cut them out of a larger angle it will be a lot easier with the pipes right there.
#7
Re:Charge Pipe Sizing?
Haha funny remark ghetto. You should be fine man. Those couplers dont stretch very much but you can get about 1/4"... they do make couplers that are different sizes on different ends or u can go to a muffler shop and they can expand the ends to the size of your couplers. Lastly id go with mostly 2" piping for your set up
mike
mike
#8
Re:Charge Pipe Sizing?
You guys have any recommendations for anyone that sells straights & bends, as well as couplings (and isn't totally overpiced)? I checked a few different places, but I'd rather get everything from one place.
#9
Re:Charge Pipe Sizing?
Originally Posted by Wally
You guys have any recommendations for anyone that sells straights & bends, as well as couplings (and isn't totally overpiced)? I checked a few different places, but I'd rather get everything from one place.