boost gauge hooked up to compressor....only 3psi???
#11
Re: boost gauge hooked up to compressor....only 3psi???
when I shift from 3rd to 4th gear
the boost gauge will jump from 3psi to 5psi within a second & start back to 3psi as I'm WOT in 4th,
the line may be kinked.....(inserted through the firewall up under everything)...but its the hard plastic type line,,,when I installed it I made sure it didnt kink)
but it doesnt feel like I'm getting much boost at all....
I'm getting 1.5 to 2psi at the IM
3psi when I put the boost gauge to the compressor....
the boost gauge will jump from 3psi to 5psi within a second & start back to 3psi as I'm WOT in 4th,
the line may be kinked.....(inserted through the firewall up under everything)...but its the hard plastic type line,,,when I installed it I made sure it didnt kink)
but it doesnt feel like I'm getting much boost at all....
I'm getting 1.5 to 2psi at the IM
3psi when I put the boost gauge to the compressor....
#12
Re: boost gauge hooked up to compressor....only 3psi???
Take off the wastegate and put on a blockoff plate.
Get another boost gauge or datalog off the stock MAP sensor to see what's really going on, it sounds like your gauge is a little dicey.
Your exhaust isn't restrictive enough to choke it off that much, especially with a turbo that small.
Get another boost gauge or datalog off the stock MAP sensor to see what's really going on, it sounds like your gauge is a little dicey.
Your exhaust isn't restrictive enough to choke it off that much, especially with a turbo that small.
#13
Re: boost gauge hooked up to compressor....only 3psi???
^sweet!!!
tonight or tomorrow morning I'm blocking off the WG,
I dont hear it open,
but thats the only other thing I can think of is it,
I HAVE put my finger inside the wastgates piping & had black sue-it <~(however) on my finger...
it may be leaking,
I'll block it off asap!
I dont have another boost gauge thou,
I can double check to see if its kinked....but it probably isn't,
being that at idle it sits at 20 in vacuum..
tonight or tomorrow morning I'm blocking off the WG,
I dont hear it open,
but thats the only other thing I can think of is it,
I HAVE put my finger inside the wastgates piping & had black sue-it <~(however) on my finger...
it may be leaking,
I'll block it off asap!
I dont have another boost gauge thou,
I can double check to see if its kinked....but it probably isn't,
being that at idle it sits at 20 in vacuum..
#14
Re: boost gauge hooked up to compressor....only 3psi???
try taking your air filter off for one run my was clogged so bad one time
that i couldn't make more than 3 psi. then you just have to look
for a boost leak in your pipes and couplers. but with a 3 psi spring in your wastegate
i would say your boost controller is not working.
that i couldn't make more than 3 psi. then you just have to look
for a boost leak in your pipes and couplers. but with a 3 psi spring in your wastegate
i would say your boost controller is not working.
#20
Re: boost gauge hooked up to compressor....only 3psi???
i Have an ebay BC...
but shouldnt the boost gauge read crazy numbers if I connected the gauge to the turbo?
no matter what leaks I would have in the piping?
I believe its the WG & I'm going to check today
but shouldnt the boost gauge read crazy numbers if I connected the gauge to the turbo?
no matter what leaks I would have in the piping?
I believe its the WG & I'm going to check today