boost gauge hooked up to compressor....only 3psi???
I've been having a boost leak/.....is what I thought,
I have only been boosting 2psi for the past 4 days, today I hooked my boost gauge up to the vaccum nipple on the compressor the highest I got to was 3psi in 4th gear @ WOT, 2nd,3rd gear only went to 2...2.5psi anyone know whats up? I have a td04h 13c / external wastegate / I tried blocking the WG's dumptube & the same problem... I have no mani leak or I would here it, I have disconnected the WG from the turbo any ideas?? |
Re: boost gauge hooked up to compressor....only 3psi???
huh???
I've been workin my ------ ass off everyday lookin for this leak & weldin like a motha fucker whats that suppose to mean? |
Re: boost gauge hooked up to compressor....only 3psi???
I have tried everything,,,
the boost gauge to the turbo should show all of the boost, boost leaks afterwards would not matter!!! & actually its pretty embarrassing to only have 2psi, |
Re: boost gauge hooked up to compressor....only 3psi???
do what he said check for leaks with soap and water check couplers for pin holes ect.. is it internal wastegate or external?
|
Re: boost gauge hooked up to compressor....only 3psi???
Originally Posted by RandysSOHC
I have a td04h 13c / external wastegate / |
Re: boost gauge hooked up to compressor....only 3psi???
Originally Posted by RandysSOHC
the boost gauge to the turbo should show all of the boost,
boost leaks afterwards would not matter!!! |
Re: boost gauge hooked up to compressor....only 3psi???
Originally Posted by RandysSOHC
|
Re: boost gauge hooked up to compressor....only 3psi???
whats your exhaust situation....
|
Re: boost gauge hooked up to compressor....only 3psi???
thx for the replys guyz.
srry I didnt post up my exhaust & spring... I have a 3.63 psi spring in it, ( But I have the WG disconnected &/or a boost controller turned all the way up) I also have a 2 1/4 downpipe & 2" exhaust I get a tad bit over 3psi when my boost gauge was reading from the turbo, WG was disconnected but that sounds right... the springs at 3.63psi & I was just getting a little over 3psi,,,but the WG was not connected to anything, when I shifted the gauge jumped up to 5psi & went back down... |
Re: boost gauge hooked up to compressor....only 3psi???
You said you shifted the gauage and it changed to 5 psi. is the line kinked or is your guage broken. hook it up to a tire inflator.
|
All times are GMT -5. The time now is 09:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands