Heath

Lots of us use the bosch 1600's on our rx7's. I'm running 2 x 850's and 2 x 1600's but will probably swap to all 1600's. I'll see if I can locate a good price.

Tom-Guy

You can ream out the OEM Honduh fuel rail with a drill bit and a block of wood as a jig. PM user Speed_Phreak, he logs in here once a month or so, he'll post the pictures of how he did it.

Thing is, OEM fuel rail sucks at or past 500 whp. But, if you just need to run them right now, it gets the job done.

ju-on

http://www.injectorservices.com/Flow...0280150837.jpg
/\/\/\ $25 a piece /\/\/\

Now looking at those ones I linked to, they are 4.7ohm's. Now if memory serves me right, DSM injectors are usually around 3-3.5 ohms. What kind of impact would a 1 ohm difference have on the system if one were to use these instead? I'm thinking probably not much, but I honestly don't know how sensitive injectors may be to these tiny differences.

92turbohatch

They make a drill bit specifically for that purpose as well but like you said,if you actually need 1600cc's on a honda the 85 bucks for an aftermarket rail's not going to kill you..


If memory serves me correct you can run high ohm injectors on your system,but you can't run low imp. injectors on a high imp system.I have a resistor box in my obd1 civic allready because I was bored and it opens up my injector options more.stock injectors and no problems for 2-3k so far.I would think you would be okay.


When i was looking into this i found this site
http://www.injectors4u.com/multiport_injectors.htm

Cool guy outa michigan that sells pretty rare or hard to find injectors and he uses oem part numbers, not any instore or whatever numbers.


Also where did you find those for 25 bucks a piece?

moak89

wow $25. so you say that these will run fine in a honda? ive also got the resistors in. so these will work fine right?

ju-on

I found them for $25 a piece, on that exact link you put up. Go down about 2/3 of the page, and you'll see them. They are for like 94-96 Dodge Truck 8 Cylinder.

92turbohatch

Last time i talked to him he was out of them,but i may have asked for other injectors I don't remember

ju-on

I already sent him an email. We'll find out.

T0DA

Search function on here doesn't work for me... tried to use it a bunch the past day or so and I get a blank screen.
Just thought I'd put that out there. But I won't make any dumb threads on "whats this" or "whats that"
I'll just pm JD.

JD, the resistor pack you sold Jared with those DSM 450's... would that resistor pack work with these bigger injectors? Just wondering, since more ohms are involved... IDK what the hell I just said.

ju-on

I would think that resistor pack would work just fine. DSM injectors in the the 3ohm range, and I don't see the 1ohm difference being a huge issue. And if it did affect it, I don't see why you couldn't work around it with tuning.

BTW, they are sold out of those injectors above. He has nothing over 1000cc