b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and 15?
04-12-2006, 06:09 PM
#31
3.0 BAR
Join Date: Mar 2004
Posts: 1,729
Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and
Originally Posted by ward
SEE thank you!
that helped a hole lot! no i can keep that for reference if any thing elese goes
the only thing im dont understand is the LED light flashing on the ecu.
the manual makes it sound so ------ hard to read
it flashes 4 times than 2 sec. break and thin flashes 15 times with no stop!
the manual says it will only flash 9 times in a row. well it doesnt if flashes 15 times for sure any answers?? to that??
that helped a hole lot! no i can keep that for reference if any thing elese goes
the only thing im dont understand is the LED light flashing on the ecu.
the manual makes it sound so ------ hard to read
it flashes 4 times than 2 sec. break and thin flashes 15 times with no stop!
the manual says it will only flash 9 times in a row. well it doesnt if flashes 15 times for sure any answers?? to that??
04-12-2006, 10:06 PM
#33
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and 15?
I always wondered how noobs got more posts than me in a month than i did in 2 years...now i know 
Anyways, the "rev limiter" you're hitting is because your 2 wires you ran to your dizzy for the mpfi swap are backwards. Reverse those 2 wires, and clear the codes from the ecu by unplugging it from the harness, wait about 10 seconds and then plug it back in. The manuals say to pull the fuse under the hood, but it never seems to do it for me on mpfi swaps. As for your code 15, having those 2 white wires reversed can fry the ignitor. Try replacing the ignitor in the dizzy and check to make sure the wires screwed onto the coil are on correctly, reset the ecu, and then try it again.
Anyways, the "rev limiter" you're hitting is because your 2 wires you ran to your dizzy for the mpfi swap are backwards. Reverse those 2 wires, and clear the codes from the ecu by unplugging it from the harness, wait about 10 seconds and then plug it back in. The manuals say to pull the fuse under the hood, but it never seems to do it for me on mpfi swaps. As for your code 15, having those 2 white wires reversed can fry the ignitor. Try replacing the ignitor in the dizzy and check to make sure the wires screwed onto the coil are on correctly, reset the ecu, and then try it again.
04-12-2006, 11:50 PM
#34
0.5 BAR
Thread Starter
Join Date: Jan 2006
Posts: 98
Re: b15b2 turbo, starts but wont rev up vary fast at all to 3K. getin code 4 and 15?
ya that seems right, however i did switch the blue wires that go to the dizzy.
the car still runs shitty doesnt seem to matter witch way there in.
now the two white wires if you (well me) backwards it will not start at all.
not even a hit.
the code 15 just some how went away. i didnt to anything. just gone!
no im left with code 4. it must be the dizzy!
i think ill buy one from ebay
the car still runs shitty doesnt seem to matter witch way there in.
now the two white wires if you (well me) backwards it will not start at all.
not even a hit.
the code 15 just some how went away. i didnt to anything. just gone!
no im left with code 4. it must be the dizzy!
i think ill buy one from ebay
Thread
Thread Starter
Forum
Replies
Last Post
Sinner
Hybrid/Tech
10
02-08-2006 11:59 AM
W O T
General Discussion
23
12-10-2005 05:16 PM
97spydagst
Forced Induction
13
06-16-2005 07:50 PM
