Askin the pros...
#21
Re: Askin the pros...
Originally Posted by beerbongskickass
Stock d-series motors can handle 425whp if Jeff Evans is doing the tuning lol... http://forums.evans-tuning.com/viewtopic.php?t=3959
Seriously though convert ot obd1 and get forged rods/pistons.
Seriously though convert ot obd1 and get forged rods/pistons.
#22
Re: Askin the pros...
Originally Posted by honda1999
Its kinda like an ssac kit (im not rich) but has a better manifold. Heard it holds up really well!
P.S.: Don't get me wrong. The above is not necessarily the thruth. It's just my 2¢.
#23
Re: Askin the pros...
Originally Posted by slo_crx1
Obd2 was designed for one thing and one thing only...emissions. That's why we convert down to obd1...for one you can still chip obd1, and 2...this is hmt...who gives a rats *** about emissions.
Eagle h-beams or similar are going to be your number 1 choice for rods. Shot-peened or not, stock d-series rods just can't handle 300hp.
Eagle h-beams or similar are going to be your number 1 choice for rods. Shot-peened or not, stock d-series rods just can't handle 300hp.
#24
Re: Askin the pros...
you convert to obd1 because you cant chip obd2 computers, that is the only reason.
your gonna trust your whole motor to a ebay wastegate? yeah cause if that fails it cant possible do any damage...
if the turbo ***** on you then nothing bad is gonna happen, some chinky turbo manifold that cracks and your turbo and WG fall off however will make your car pretty hard to drive.
oh and i thought this was home made turbo not hey i bought a shitty kit on ebay turbo
Originally Posted by BLAAST
if i had to choose between a ***** manifold and ***** turbo, I'll get the ***** manifold all day long because if properly installed, it could perform just right for a reasonable period of time. Same applies to WG, BOV, IC and all the plumbing.
if the turbo ***** on you then nothing bad is gonna happen, some chinky turbo manifold that cracks and your turbo and WG fall off however will make your car pretty hard to drive.
oh and i thought this was home made turbo not hey i bought a shitty kit on ebay turbo
#25
Re: Askin the pros...
Sure, a wastegate that decides to no longer open all of a sudden can be damaging. That's for sure! But I did not ear too many story of sudden overboosting due to a chinese wastegate failure. If they are defective, they don'T work from the start. When they do work (most of the times) they can work for a very long time.
i 100% agree that an authentic brand name wastegate is certainly more reliable but as you say, it's home made turbo and we have to accept reasonable compromises where it'S possible. as far as the chinese WG's go, i would say yes, they do make sense for a budget minded setup. the ***** turbos however, is a whole different story. Even if it doesn't necessarily damage the engine when it fails, it's still a major and expensive show stopper IMO!
i 100% agree that an authentic brand name wastegate is certainly more reliable but as you say, it's home made turbo and we have to accept reasonable compromises where it'S possible. as far as the chinese WG's go, i would say yes, they do make sense for a budget minded setup. the ***** turbos however, is a whole different story. Even if it doesn't necessarily damage the engine when it fails, it's still a major and expensive show stopper IMO!
#26
Re: Askin the pros...
Originally Posted by BLAAST
if i had to choose between a ***** manifold and ***** turbo, I'll get the ***** manifold all day long because if properly installed, it could perform just right for a reasonable period of time. Same applies to WG, BOV, IC and all the plumbing. For the turbo however, it's a complete different story: a chinese turbo immitation WILL cost you less to start with, but will fail on you in no time, resulting in costly downtime, replacement or repair costs, making this choice more expensive than having choosen a dependable turbo to start with, even if it meant delaying the installation time by a few extra days/weeks of money saving to do it right. same applies to engine management, you don'T want to cut corners short on that either.
P.S.: Don't get me wrong. The above is not necessarily the thruth. It's just my 2¢.
P.S.: Don't get me wrong. The above is not necessarily the thruth. It's just my 2¢.
Ive learned alot so far from reading your guys' posts. So Do you guys thin Its possible to make 300hp on this setup?
#27
Re: Askin the pros...
The "guys" is just me.
Your idea to purchase the whole kit, sell the ***** turbo and replace it for a good one is an excellent one. Although I am sure the ***** t3/t4 is in theory able of the power gains. only it's reliability is doubtfull.
Please, confirm the size of your intercooler core. If it's 2.5 x 5.5 x 21, this one supports only 290 HP
if it's 3x 6.4 x 18.... it supports 310 HP. (that's the flow specs for real garrett/spearco cores so the ***** ones should be even less)
So please, double check your IC core size. You may need to get a bigger chinese intercooler such as a 9" or even 12" high one. No biggy, they're cheap. Just re-sell that nice turbo + Ic ***** combo on ebay!
for the rest, you're all set, it's all 300 HP ready! ***** or not!
Your idea to purchase the whole kit, sell the ***** turbo and replace it for a good one is an excellent one. Although I am sure the ***** t3/t4 is in theory able of the power gains. only it's reliability is doubtfull.
Please, confirm the size of your intercooler core. If it's 2.5 x 5.5 x 21, this one supports only 290 HP
if it's 3x 6.4 x 18.... it supports 310 HP. (that's the flow specs for real garrett/spearco cores so the ***** ones should be even less)
So please, double check your IC core size. You may need to get a bigger chinese intercooler such as a 9" or even 12" high one. No biggy, they're cheap. Just re-sell that nice turbo + Ic ***** combo on ebay!
for the rest, you're all set, it's all 300 HP ready! ***** or not!
#28
Re: Askin the pros...
you MIGHT have had a chance...but you're girl doesnt flash her **** while under YOUR car turning wrenches, and if she does you havnt posted pics of it.
Hello I'm DM, and I almost approved of this thread
gimme another beer
Hello I'm DM, and I almost approved of this thread
gimme another beer
#30
Guest
Posts: n/a
Re: Askin the pros...
Originally Posted by beerbongskickass
blaast you sound like a retard. You didn't mention one thing about fuel management or his rods, and that will be the things he needs to worry about the most, not some shitty ebay turbo kit.