anyway to make sure BOV works?
#5
Guest
Posts: n/a
Re:anyway to make sure BOV works?
lol, maybe riceboys will one day someone get like a pressurized source (like a small compressor from an airhorn) and hook it up and pretend they got boost!
anyhow, i hope i can weld it on my charge pipe, i don't have a flange though..
do i need a special flange for a 2G DSM BOV??
anyhow, i hope i can weld it on my charge pipe, i don't have a flange though..
do i need a special flange for a 2G DSM BOV??
#7
Re:anyway to make sure BOV works?
thats right kine, thats what I did. Used a 94 civic EX stock intake pipe
cut this out (dremel or X-acto knife)
make sure you have that rubber gasket piece on the BOV and just slide it into the socket, and it has a groove for a hose clamp. and plug the valve cover breather grommet with a bolt and a hose clamp otherwise air will leak out
cut this out (dremel or X-acto knife)
make sure you have that rubber gasket piece on the BOV and just slide it into the socket, and it has a groove for a hose clamp. and plug the valve cover breather grommet with a bolt and a hose clamp otherwise air will leak out
Thread
Thread Starter
Forum
Replies
Last Post
2G6
Wanted
3
09-04-2006 06:09 AM
turbohf
Engine Management
44
05-12-2006 02:29 PM