anyway to make sure BOV works?
 

Do you need to test the BOV before using putting it on? can you find out if it works before welding?

Re:anyway to make sure BOV works?
 

hook a vacuum line to it. rev your car. it'll close and open when you press on the gas and let off.

Re:anyway to make sure BOV works?
 

whoooo! fun! that's pretty cool... i wonder why riceboys don't do this to get the stupid sound

Re:anyway to make sure BOV works?
 

cause it wont give you a sound unless there is pressure to release, the air escaping is what makes the sound

Re:anyway to make sure BOV works?
 

lol, maybe riceboys will one day someone get like a pressurized source (like a small compressor from an airhorn) and hook it up and pretend they got boost!

anyhow, i hope i can weld it on my charge pipe, i don't have a flange though..

do i need a special flange for a 2G DSM BOV??

Re:anyway to make sure BOV works?
 

on some civic stock air intakes there is a hole that is the perfect size of a crappy plastic 2g bov. use that i got a ---- load of those layin' around

Re:anyway to make sure BOV works?
 

thats right kine, thats what I did. Used a 94 civic EX stock intake pipe

cut this out (dremel or X-acto knife)
http://www.imagestation.com/picture/...3/fc6aae4f.jpg

http://www.imagestation.com/picture/...0/fc6aae55.jpg

make sure you have that rubber gasket piece on the BOV and just slide it into the socket, and it has a groove for a hose clamp. and plug the valve cover breather grommet with a bolt and a hose clamp otherwise air will leak out

Re:anyway to make sure BOV works?
 

LMFAO... god that cracks me up everytime I see that..

------- ghetto-d, heh

Re:anyway to make sure BOV works?
 

thats a good idea ;D

Re:anyway to make sure BOV works?
 

wtf!?

is that horn to make the "psssssssssssssh" sound louder?