Re: Anyone use some type of coupler glue on chargepipes ?
Originally Posted by St.Taint
Quit ordering shitty $80 eBay pipe kits that aren't bead rolled.
|
Re: Anyone use some type of coupler glue on chargepipes ?
get t-bolts.
|
Re: Anyone use some type of coupler glue on chargepipes ?
just take pliers and make the end of the charge pipe a little bigger, like a bell end (nothing way over the top, just somthing that will prevent the clamp from coming off)
|
Re: Anyone use some type of coupler glue on chargepipes ?
Never heard of hairspray, but hair gel works great.
|
Re: Anyone use some type of coupler glue on chargepipes ?
weld a peice of steel oer the couplers
|
Re: Anyone use some type of coupler glue on chargepipes ?
eliminating as many as possible is what I would do. You should only have 4 couplers if possible. Other than that, clean pipes, silicone couplers, and t-bolt clamps should be good to go.
|
Re: Anyone use some type of coupler glue on chargepipes ?
just use t bolt clamps and you will be fine. unless you are using a gt42 at 50 psi you should have no issues.
I am running fairly big turbo at 23 psi full throttle no blown couplers. just get the clamps |
Re: Anyone use some type of coupler glue on chargepipes ?
my setup, tight piping, 4 couplers from home depot with gear clamps. held 30psi strong
|
Re: Anyone use some type of coupler glue on chargepipes ?
Originally Posted by 89dxhunchback
I don't have any issues with the pipes coming off, but every bit helps when your making 400whp with a mistu TD04 turbo. Even small boost leaks drain power, essp. when your maxing the turbo out.
Originally Posted by Joseph Davis
Never heard of hairspray, but hair gel works great.
If your using t-bolts and hairgel with a bead on the pipe,or rolled lip, and still blowing pipes off, then you have a serious problem. If I got to that point and was STILL blowing pipes off, I might consider if my bov was functioning properly, or if I had it set too stiff, or if my bov line wasnt going straight to the intake manifold..... |
Re: Anyone use some type of coupler glue on chargepipes ?
hairspray worked for me untill 15psi. then thats when it pops. but i don't mind, my built in boost cut O0
|
All times are GMT -5. The time now is 12:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands