http://cgi.ebay.com/ebaymotors/ws/eB...532939495&rd=1

or should i just buy a turbo xs standard

 

just buy a dsm one, way cheaper and it works

 

Probably another cheap Ebay knock off. I have a cheapy from ebay but not that one. The only thing you might find with a ebay BOV is that you still get compressor surge because the spring is too heavy. My solution was I went to the local hardware store with the spring and found a similar sized one with a lighter spring rate. Added a total of 50 cents to the cost of my BOV.

 

I should be getting mine in the mail any day now. I got it for $30 + shipping. I'll let you know how it performs

 

I've got that bov. It sounds pretty good at about 10 psi.. but at like 5 and below it sounds like ----.. it like flutters instead of blowing off... for that much save up a couple extra bucks and get the hks ssqv or something.

 

that looks identical to a turbo xs Type h and RFL

rfl with horn

type h

 

Got it in the yesterday. Looks very good. One thing I would recommend doing is taking it apart and applying a bit of grease to the valve body. The grease it has on there is rather thick and not very fluid. That might explain the flutter. The spring in there is also rather stiff, If you could get something a bit less stiff, then this BOV might work well for you. I'll post pics when I get a chance

 

i got one of those also... luckily i'm going to run 11 psi so i guess i don't have to worry about the spring being to hard :P it's just sitting in my closet though next to all my other turbo parts... :P